-
×
Dynabrade 94825 - 1/2" ID, 5' Long Air Hose Assembly, Female/ Male Fitting Ends Included
1 × $65.58 -
×
Dynabrade 56183 6" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
1 × $34.14 -
×
Dynabrade 59182 6" Dia. Dynorbital-Spirit Random Orbital Sander, Central Vacuum, 3/16" Orbit
1 × $240.00 -
×
Dynabrade 58505 3-1/4" W x 5" L Dynabug II Orbital Sander, Central Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $263.00 -
×
Dynabrade 58040 11" Dia. Two-Hand Gear-Driven Sander, Non-Vacuum, .45 HP, 900 RPM, Hook-Face Pad
1 × $796.00 -
×
Dynabrade 51926 Vane Set (4pk)
1 × $29.53 -
×
Dynabrade 92801 5" Dia. x 3-1/2" W Standard Dynacushion Pneumatic Wheel
1 × $180.01 -
×
Dynabrade 25234 Vane Set (4pk)
1 × $28.26
-
×
Dynabrade X62V 6" (152mm) Dia. Central-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/32" Orbit, Hook-Face
1 × $234.00 -
×
Dynabrade 58500 3" W x 4-1/4" L Dynabug II Orbital Sander, Non-Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $250.00 -
×
Dynabrade 40378 Rubber Drive Wheel, Mini Dynafile II
1 × $140.64 -
×
3M 45335, Impact Stripping Tape 528, Tan, 2 in x 20 yd, 82 mil, 6 rolls per case, 7100084365
6 × $114.73 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Dynabrade 91437 1/2" W x 24" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.44 -
×
Dynabrade 93609 1" Dia. x 3/8", 3-48 Female Center Thread, 60 Grit A/O, 8 Ply, J-DynaCut Cross Pad, 100/pack
100 × $1.34 -
×
Dynabrade 90495 1/2" W x 34" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $2.27 -
×
3M 31887, ScotchBlue Original Painter's Tape 2090-24EP6, 0.94 in x 60 yd (24mm x54,8m), 6 rolls/pack, 7100188447
4 × $22.86
Standard Abrasives 541060, Quick Change TS Medium Disc Pad w/TA4, 3 in, 7000047196
$20.72
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Quick Change Disc Pads, also called Holder Pads, allow you to rapidly change Standard Abrasives quick change discs (sold separately) during multi-step projects. ?A wide range of sizes and densities are available, ensuring that you can find the pad(s) that best suits your specific grinding and finishing application.
Three Attachment Types: TS, TR, TP
Standard Abrasives™ Quick Change Disc Pads come with one of three quick change attachment styles. Attachment styles include TS, TR and TP. TS is a standard metal-to-metal attachment style, TR is a 3M™ Roloc™ style nylon threaded male hub, and TP is a snap-on/snap-off nylon fastening hub. Each of the attachment styles allows easy swap out of discs with a speedy quarter turn.
Choosing a Mandrel
Our Standard Abrasives™ Quick Change Disc Pads are available with or without mandrels. Some TS and TR holder pads come with an attached 1/4-inch diameter TA4 mandrel. Others come with an attached 6 mm diameter TA6 mandrel. TP disc holders come with the TA4 mandrel attachment only. Disc pads are also available without mandrels, so users can select a mandrel of their choice for their application. Holders without an attached mandrel feature a 1/4-20 female thread interface for mandrel attachment. Once the mandrel is attached, users typically fasten the disc pad/mandrel assembly to a rotary tool or die grinder.
Which Density is Best?
Different densities signal varying levels of flexibility of the disc pad. Soft density disc pads are most flexible, and are typically reserved for fine grade abrasive products used in finishing and contouring applications. Medium density disc pads are typically used for general purpose type work. Hard density disc pads are the most rigid, and are typically reserved for coarse grade abrasive products used in weld grinding and stock removal applications.
Altogether, Standard Abrasives™ Disc Pads allow for quick and easy disc attachment and removal, enhancing productivity and adding efficiency to your industrial applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
