-
×
Dynabrade 95677 1/4" Male Plug with 1/4" NPT Female Thread
1 × $4.86 -
×
3M 86806, Hand-Masker Contractor's Plastic CP4, 4 ft x 180 ft x .35 mil (1,21m x 54,8 m x .00889 mm), 1 Roll/Pack, 7010377676
12 × $8.25 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.95 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $1.05 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.54 -
×
ACS Diamond Cloth Belt, CX1250 3/8" X 24" 75U
16 × $5.80 -
×
3M 26597, Cloth Belt 341D, P320 X-weight, 1 in x 42 in, Film-lok, Single-flex, 7010294511, 200 per case
200 × $2.35 -
×
3M 36866, Dirt Trap Wall Material Applicator, 36866, 1 per case, 7000045517
1 × $1,661.06
-
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
1000 × $0.74 -
×
3M 16612, Accuspray Atomizing Head, Orange, 1.4 mm, 7100017731 (4 Nozzles/Kit)
6 × $33.85 -
×
3M 08023, Adhesive Sealant 740 UV, White, 600 mL Sausage Pack, 7000000933, 12/Case
12 × $23.20 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
1000 × $0.74 -
×
3M 28817, STIKIT LOW PROFILE DISC PAD, EXTRA FIRM, 5 IN X 3/8 IN X 5/16 IN, 24 EXTERNAL, 7010361145
10 × $28.85 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
2000 × $0.74 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
3M 66602, Cloth Belt 341D, 3 in x 21 in P100 X-weight, 7010326491, 50 per case
50 × $2.78 -
×
3M 43474, Glass Cloth Tape 3615, White, 1 in x 36 yd, 7 mil, 7000048876
36 × $54.75 -
×
3M 71528, Cloth Belt 341D, P100 X-weight, 37 in x 60 in, Sine-lok, Single-flex, 7010360545, 5 per case
5 × $99.46 -
×
3M 26571, Cloth Belt 341D, 36 X-weight, 2 in x 48 in, Film-lok, Single-flex, 7010326186, 50 per case
50 × $4.97 -
×
3M 27496, Cloth Belt 340D, 3 in x 21 in P100 X-weight, 7010326380, 50 per case
50 × $2.78 -
×
3M 57043, Flexible Prismatic Reflective Barricade Sheeting 3334R Orange/White,4 in stripe/right, 11.75 in x 100 yd, 7010316740
1 × $712.59
-
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.80
-
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $482.25 -
×
3M 57023, Flexible Prismatic Reflective Sheeting 3310 White, 6 in x 50 yd, 7000055690
1 × $209.88
-
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.46
-
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.63 -
×
3M 06742, Overspray Protective Sheeting, 20 ft x 250 ft, 7000120043
1 × $79.91 -
×
ACS CX1250 Diamond Belts, 1/2" X 24" 200u
12 × $8.20
-
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $1.07
STANDARD ABRASIVES 541053, QUICK CHANGE TS SOFT DISC PAD W/TA4, 1-1/2 IN, 7010310567
$18.55
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Quick Change Disc Pads, also called Holder Pads, allow you to rapidly change Standard Abrasives quick change discs (sold separately) during multi-step projects. ?A wide range of sizes and densities are available, ensuring that you can find the pad(s) that best suits your specific grinding and finishing application.
Three Attachment Types: TS, TR, TP
Standard Abrasives™ Quick Change Disc Pads come with one of three quick change attachment styles. Attachment styles include TS, TR and TP. TS is a standard metal-to-metal attachment style, TR is a 3M™ Roloc™ style nylon threaded male hub, and TP is a snap-on/snap-off nylon fastening hub. Each of the attachment styles allows easy swap out of discs with a speedy quarter turn.
Choosing a Mandrel
Our Standard Abrasives™ Quick Change Disc Pads are available with or without mandrels. Some TS and TR holder pads come with an attached 1/4-inch diameter TA4 mandrel. Others come with an attached 6 mm diameter TA6 mandrel. TP disc holders come with the TA4 mandrel attachment only. Disc pads are also available without mandrels, so users can select a mandrel of their choice for their application. Holders without an attached mandrel feature a 1/4-20 female thread interface for mandrel attachment. Once the mandrel is attached, users typically fasten the disc pad/mandrel assembly to a rotary tool or die grinder.
Which Density is Best?
Different densities signal varying levels of flexibility of the disc pad. Soft density disc pads are most flexible, and are typically reserved for fine grade abrasive products used in finishing and contouring applications. Medium density disc pads are typically used for general purpose type work. Hard density disc pads are the most rigid, and are typically reserved for coarse grade abrasive products used in weld grinding and stock removal applications.
Altogether, Standard Abrasives™ Disc Pads allow for quick and easy disc attachment and removal, enhancing productivity and adding efficiency to your industrial applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
