-
×
Dynabrade 82550 1/2" W x 18" L 40 Grit Ceramic DynaCut Belt, 50/pack
50 × $2.86 -
×
Dynabrade 78007 1/2" W x 12" L Medium Non-Woven DynaBrite Belts, 10/pack
10 × $5.03 -
×
Dynabrade 53053 Chuck Key for 53033, 53087 Chuck
1 × $35.86 -
×
Dynabrade 04078 Silencer
1 × $3.33 -
×
Dynabrade 91427 1/4" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.15 -
×
Dynabrade 82560 1/2" W x 18" L 80 Grit Ceramic DynaCut Belt, 50/pack
50 × $2.86
-
×
Dynabrade 56158 6" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
1 × $41.07 -
×
Dynabrade 92296 - 4" (102 mm) Dia. RED-TRED Eraser Disc Assembly
1 × $97.93 -
×
Dynabrade 92245 - 4" (102 mm) Dia. x 3/4" (19 mm) W Bent Coarse Wire Wheel
2 × $47.09 -
×
Dynabrade 79689 8" 180 Grit, Extreme Orange Hook & Loop Disc w/8 Vac Holes, 25 per Box
1 × $51.14 -
×
Dynabrade 52675 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 9,000 RPM, 1/4" Collet
1 × $765.00 -
×
Standard Abrasives 713402, A/O Straight Cartridge Roll, 3/8 in x 2 in x 1/8 in 80, 7100103094
100 × $0.54 -
×
Dynabrade 91119 1/2" W x 18" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.35
-
×
Dynabrade 52596 5" Dia. Right Angle Disc Sander, Central Vacuum, 1.3 HP, 12,000 RPM, 5/8"-11 Spindle Thread
1 × $962.00 -
×
Dynabrade 79850 - 5" Universal Vacuum Hole Interface Pad
1 × $7.41
-
×
Dynabrade 55404 Vanes, 4/Set, Vaned Pencil Grinder
1 × $39.08
-
×
Dynabrade 92740 2" W x 150' L 30 Micron A/O Lapping Film DynaCut Roll
1 × $127.40 -
×
Dynabrade 97060 Lever Pivot Pin, M2.5 x 24
1 × $2.07
STANDARD ABRASIVES 541006, QUICK CHANGE TS SOFT DISC PAD, 2 IN, 7010330770
$17.00
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Quick Change Disc Pads, also called Holder Pads, allow you to rapidly change Standard Abrasives quick change discs (sold separately) during multi-step projects. ?A wide range of sizes and densities are available, ensuring that you can find the pad(s) that best suits your specific grinding and finishing application.
Three Attachment Types: TS, TR, TP
Standard Abrasives™ Quick Change Disc Pads come with one of three quick change attachment styles. Attachment styles include TS, TR and TP. TS is a standard metal-to-metal attachment style, TR is a 3M™ Roloc™ style nylon threaded male hub, and TP is a snap-on/snap-off nylon fastening hub. Each of the attachment styles allows easy swap out of discs with a speedy quarter turn.
Choosing a Mandrel
Our Standard Abrasives™ Quick Change Disc Pads are available with or without mandrels. Some TS and TR holder pads come with an attached 1/4-inch diameter TA4 mandrel. Others come with an attached 6 mm diameter TA6 mandrel. TP disc holders come with the TA4 mandrel attachment only. Disc pads are also available without mandrels, so users can select a mandrel of their choice for their application. Holders without an attached mandrel feature a 1/4-20 female thread interface for mandrel attachment. Once the mandrel is attached, users typically fasten the disc pad/mandrel assembly to a rotary tool or die grinder.
Which Density is Best?
Different densities signal varying levels of flexibility of the disc pad. Soft density disc pads are most flexible, and are typically reserved for fine grade abrasive products used in finishing and contouring applications. Medium density disc pads are typically used for general purpose type work. Hard density disc pads are the most rigid, and are typically reserved for coarse grade abrasive products used in weld grinding and stock removal applications.
Altogether, Standard Abrasives™ Disc Pads allow for quick and easy disc attachment and removal, enhancing productivity and adding efficiency to your industrial applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
