-
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
Dynabrade 78199 3" Dia. x 120 Grit A/O DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
25 × $1.29 -
×
3M 81920, Hookit Microfinishing Film Disc 268L, 30 Mic, Type D, 5 in x NH, Die 500X, 7000118204, 500 ea/Case
500 × $1.24 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
Dynabrade 79152 1" W x 24" L 80 Grit DynaCut Premium Ceramic Belt, 50/pack
50 × $6.50 -
×
3M 34564, Cubitron II Net Sheet Roll, 180+, 70 mm x 10 m, 7100247499, 6 Rolls/Case
6 × $26.89 -
×
3M 05440, Stikit Hand Block, Hard 2-3/4 in x 5 in, 7000045764
10 × $26.95 -
×
3M 34552, Cubitron II Net Sheet Roll, 150+, 80 mm x 10 m, 7100247337, 6 Rolls/Case
6 × $28.94 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M 06728, Premium Plastic Sheeting with 233+ Masking Tape (36 mm), 16
ft x 400 ft, 7100139893
1 × $87.14 -
×
3M 71347, 641WY, 3" X 30", 220 Mesh, Diamond Cloth Belts, 7010534831
1 × $137.54 -
×
3M 05744, Hookit Hand File Board, 2-3/4 in x 16 in, 7000045717
1 × $73.94 -
×
3M 05777, Hookit Soft Interface Pad, 6 x 1/2 x 3/4 inch, 7000028239
10 × $20.46 -
×
Dynabrade 78594 3/8" Dia. x 1-1/2" W x 1/8" Center Hole, 60 Grit, 100/pack
100 × $50.00 -
×
3M 84177, Microfinishing PSA Film Disc Roll 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7000118206, 125 discs per roll
4 × $112.92
-
×
Dynabrade 58441 5" Dia. Two-Hand Gear-Driven Sander, Non-Vacuum, .45 HP, 900 RPM, Hook-Face Pad
1 × $556.28 -
×
Dynabrade 78580 1/4" Dia. x 1" W x 1/8" Center Hole, 80 Grit, 100/pack
100 × $0.45
-
×
Dynabrade 78581 1/4" Dia. x 1" W x 1/8" Center Hole, 120 Grit, 100/pack
100 × $0.45
-
×
Dynabrade 78588 1/4" Dia. x 2" W x 1/8" Center Hole, 80 Grit, 100/pack
100 × $56.00
-
×
Dynabrade 78595 3/8" Dia. x 1-1/2" W x 1/8" Center Hole, 80 Grit, 100/pack
100 × $0.61
-
×
Dynabrade 78195 3" Dia. x 36 Grit A/O DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
25 × $26.00
3M 80513, Roloc Disc 777F, TR, 3 in x NH, P120 YF-weight, 7000000557
$1.32
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
