-
×
3M 08029, Marine Grade Silicone Sealant, Clear, 304 mL Cartridge, 7000120477, 12/Case
12 × $33.72 -
×
Dynabrade 78776 3/8" x 1-1/2"-W176 Dynacut Cotton Fibre Fine DeBurring Mounted Point, 80MTX, 10/pack
10 × $61.00 -
×
3M 26125, PPS Series 2.0 Adapter, Type S29, 8 mm Male, 1.25 mm Thread, 7100135955
1 × $25.96 -
×
3M 16312, PPS Lid & Liner Kit, Midi (13.5 fl oz), 125 Full Diameter
Micron Filter, 50 Lids & Liners per kit, 7100018936
1 × $125.53 -
×
Dynabrade 78808 4" Dia. x .020 x 3/8"-24 UNF Roughneck Stringer Bead Twist Wire Wheel, Steel
1 × $27.00 -
×
3M 97956, Super 77 CA Multipurpose Spray Adhesive, Low VOC <25%, Clear, 24 fl oz Can, 7100014109, 12/Case
12 × $16.85 -
×
Dynabrade 78535 3/8" x 3/4"-B52 Dynacut Cotton Fibre Fine DeBurring Mounted Point, 80MTX, 10/pack
10 × $10.80 -
×
Dynabrade 78698 D9-4 Cartridge Roll Mandrel 1/8" Pilot Dia. x 1" Pilot Length, 1/4" Dia. Shank x 4" Shank Length
1 × $14.31 -
×
Dynabrade 78833 Crimped Wire End Brush 3/4" Dia. x .020 x 7/8" Steel
1 × $9.78 -
×
Dynabrade 78356 6" Dia. x 1" W x 1" Center Hole, 9S Fine, S/C DynaBrite Deburring Convolute Wheel, 2/box
2 × $150.79 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $1,925.99 -
×
Dynabrade 78764 2" Dia. x 2" W x 1/4" Shank, Medium, NWN DynaBrite Wheel, 10/pack
10 × $16.86 -
×
Dynabrade 90762 1" Dia. x 2" W, Medium, Non-Woven DynaBrite Band, 10/pack
10 × $11.95 -
×
Dynabrade 92764 3" W x 50' L 30 Micron, Diamond Lapping Film DynaCut Roll
1 × $853.23 -
×
3M 33415, Cubitron II Abrasive Fibre Disc, 5 in x 7/8 in (125mm x 22mm), 60+, 7100033181, 5 discs per carton
5 × $33.09 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M 87261, Scotch-Weld Epoxy Adhesive DP100, Clear, 400 mL Duo-Pak, 7000121318, 6/case
6 × $146.93 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
Dynabrade 92086 3" Dia. x 36 Grit Ceramic Non-Vacuum DynaCut Locking-Type Disc, 25/pack
25 × $2.57
3M 76634, Roloc Disc 777F, 80 YF-weight, TR, 3 in, Die R300V, 7000000555
$1.38
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
