-
×
3M 50018, Venture Tape Metallized Cloth Duct Tape 1502, Silver, 48 mm x 55 m (1.88 in x 60.1 yd), 7010337385
24 × $19.28 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
2 × $1,925.99 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
Dynabrade 95886 Washers For Vacuum Shroud (57737)
1 × $1.93 -
×
3M 05535, Cubitron II Cloth Belt 981F, 4 x 132 in, 40+, YF-weight, Film-lok, 7100164954, 25 per case
25 × $24.31 -
×
Dynabrade 78125 3" Dia., Very Fine, NWN DynaBrite, TR Locking-Type Disc, 25/pack
25 × $3.64 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
Dynabrade 90367 3/4" W x 34" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $2.38 -
×
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
1 × $77.83 -
×
Dynabrade 53477 Direct Drive Reversible Screwdriver, .5 HP, 3,700 RPM, 1/4" Hex Drive
1 × $779.32 -
×
Dynabrade 59339 Vacuum Cuff, 1", w/Groove
1 × $12.63 -
×
Dynabrade 95541 Grease Gun
1 × $31.98 -
×
Dynabrade 52700 3" (76 mm) Dia. 7 Degree Offset Depressed Center Wheel Grinder, .7 HP, 18,000 RPM, 3/8"-24 Spindle
1 × $607.02 -
×
3M 95725, Venture Tape Metal Building Facing Tape 1552CW, White, 72 mm x 45.7 m, 7010313505
16 × $26.60 -
×
Dynabrade 95263 Open-End Wrench, 17 mm
1 × $5.96 -
×
Dynabrade 90368 3/4" W x 34" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $2.38
-
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
Dynabrade 93095 3" Dia. x 80 Grit Premium Ceramic Non-Vacuum DynaCut, Locking-Type Disc, 3 Ply Cloth, 25/pack
25 × $2.09
3M 76634, Roloc Disc 777F, 80 YF-weight, TR, 3 in, Die R300V, 7000000555
$1.38
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
