-
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
15 × $7.30 -
×
Standard Abrasives 714179, Aluminum Oxide Handy Roll, P240 J-weight, 1-1/2 in x 50 yd, 7100050575
1 × $41.26 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
3 × $28,988.00 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.55 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
Standard Abrasives 725012, Buff and Blend Cross Buff HS, A/O Medium, 1-1/2 in x 1/2 in x 2 Ply x 8-3, 7000046830
50 × $5.20 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.95 -
×
Standard Abrasives 713159, Aluminum Oxide Handy Roll, P120 J-weight, 1-1/2 in x 50 yd, 7010290409
1 × $41.26 -
×
3M 06586, Marine, Adhesive, Sealant, 4000, UV, White, 400, mL, milliliter, Sausage, Pack, 7000121532, 12/ case
12 × $20.32 -
×
Dynabrade 58505 3-1/4" W x 5" L Dynabug II Orbital Sander, Central Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
3 × $263.00 -
×
3M 45713, Cubitron II Hookit Cloth Disc 947A, 80+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113145
200 × $1.07 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
20 × $13.91 -
×
Standard Abrasives 727395, Buff and Blend Cross Buff HS, A/O Coarse, 2 in x 1/2 in x 2 Ply x 8-32, 7010299537
25 × $6.67 -
×
ACS Diamond Cloth Belt, CX1250 1/4" X 24" 75U
24 × $3.80 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.77 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
2 × $1,721.00 -
×
Standard Abrasives 725017, Buff and Blend Cross Buff GP, A/O Fine, 3/4 in x 3/8 in x 2 Ply x 8-32, 7010330367
50 × $3.14 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.82 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
1500 × $0.66 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
1 × $556.93 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $553.91 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
3M 19771, Utility Cloth Sheet 314D, 9 in x 11 in P100 J-weight, 7000021272
250 × $1.57 -
×
Standard Abrasives 724277, Buff and Blend Circle Buff GP, A/O Very Fine, 2 in x 2 Ply x 8-32, 7010368699
25 × $7.30 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
2 × $1,520.00 -
×
Dynabrade 78295 3" Dia. x 6A M Medium Type R Unitized Locking-Type Disc, 25/pack
25 × $14.88 -
×
Dynabrade 58503 3-1/4" W x 5" L Dynabug II Orbital Sander, Non-Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $250.00 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
2 × $2,022.00 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $194.88 -
×
3M 20967, Portable Utility Cloth Roll 314D, P240 J-weight, 1 in x 20 yd, 7010290604
5 × $17.83 -
×
Dynabrade 78098 2" Dia. x 36 Grit A/Z DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
25 × $2.12
3M 76746, Roloc Disc 777F, 50 YF-weight, TS, 2 in, Die RS200P, 7010363894
$1.30
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
