-
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $915.00 -
×
3M 77157 Scotch-Brite Durable Flex Belt, 77157, 1/2 in x 18 in, A MED, Trial Pack, 7010365702
10 × $19.33 -
×
3M 20356, Hookit Clean Sanding Low Profile Disc Pad, 6 in x 3/8 in x 5/16-24 External 52 Holes Red Foam, 7100027464
10 × $37.88 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
3 × $1,245.00 -
×
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
50 × $5.53 -
×
3M 20278, Clean Sanding Soft Interface Disc Pad, 5 in x 1/2 in x 3/4 in Multihole, 7100006170
10 × $17.17 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 250U
12 × $6.15 -
×
Standard Abrasive 78548, Ceramic Pro Type 29 High Density Flap Disc, 645183, 4 1/2 in x 7/8 40 Y-weight, 7010292440
10 × $8.63 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
2 × $4.57 -
×
Dynabrade 94876 25' Max Flow 5/16" I.D. Air Hose Assembly, Male (1/4") / Male (1/4") Fitting Ends Included
1 × $110.80 -
×
Standard Abrasives 32920, PSA A/O Disc, 708027, 6 in x NH, 120, 7100083004
50 × $1.27 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
Standard Abrasives 78526, Ceramic Pro Type 29 Flap Disc, 645135, 4-1/2 in x 7/8 80 Y-weight, 7010369546, 10 per case
10 × $7.50 -
×
3M 05744, Hookit Hand File Board, 2-3/4 in x 16 in, 7000045717
1 × $73.94 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
Standard Abrasives 78511, Ceramic Pro Type 27 Flap Disc, 645104, 4-1/2 in x 5/8-11 80 Y-weight, 7010331461
10 × $9.26 -
×
ACS CX1250 Diamond Belts, 1/2" X 24" 200u
12 × $8.20 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
Dynabrade 76019 - 8 mm Air Line Ass'y, 2' Long
1 × $35.81 -
×
Standard Abrasives 717078, Cartridge Roll Mandrel, 3/32 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-2E, 7000121813
5 × $4.88 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
2 × $1,569.00 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
3M 05228 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 3-1/2 in x 15-1/2 in, 7000028435
10 × $27.92 -
×
3M 36518, Green Corps Abrasive File Belt, 80 Grit, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100226321, 20 Belts Per Carton, 5 Cartons Per Case
5 × $42.67 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
Standard Abrasives 78519, Ceramic Pro Type 27 Flap Disc, 645122, 7 in x 7/8 60, Y-weight, 7010291252
5 × $12.78 -
×
Dynabrade 92027 2" Dia. x 60 Grit Ceramic DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
25 × $1.61
3M 76746, Roloc Disc 777F, 50 YF-weight, TS, 2 in, Die RS200P, 7010363894
$1.18
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
