-
×
Insize 8910-100GF1, WEIGHT SETS_1mg~100g, 6940561907582
1 × $756.88 -
×
Dynabrade 52184 Gear Set
1 × $419.41 -
×
Dynabrade 13503 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8" (16 mm) Dia. Arbor
1 × $996.00 -
×
Insize 8910-1KGF2, WEIGHT SETS_1mg~1kg, 6940561907704
1 × $576.63
-
×
Dynabrade 78709 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.57 -
×
Dynabrade 90996 Tungsten Carbide Insert, 1/8" Scribe
1 × $62.46 -
×
Dynabrade 50014 3/8" (.375) Capacity Collet Sleeve
1 × $35.13 -
×
Insize 1525-500E, DIGITAL CENTERLINE/EDGE TO CENTER CALIPER, Range of upper jaw (edge to center): .4-20"/10.5-500mm, Range of lower jaw (center to center): .8-20"/20.5-500mm, 6928640380624
1 × $1,456.25
-
×
Insize 8501-AL150, PLATFORM SCALE, .40lb~330lb, 6940561947403
1 × $1,587.25
-
×
Insize 8910-100GM1, WEIGHT SETS_1mg~100g, 6940561907735
1 × $190.75
-
×
Dynabrade 900 8" Dia. Two-Hand Gear-Driven Sander, Non-Vacuum, .25 HP, 800 RPM, 3/16" Orbit, PSA
1 × $615.00 -
×
Dynabrade 55540 .4hp, Right Angle Die Grinder, 12,000 RPM, Aluminum Housing, Rear Exhaust, 1/4" Collet
1 × $640.00 -
×
Insize 3280-1, NON ROTATING SPINDLE UNIVERSAL MICROMETER, 0-1", 6928640328077
1 × $398.44
-
×
Dynabrade 79032 1/2" W x 18" L 80 Grit A/Z DynaCut Belt, 50/pack
50 × $1.73 -
×
Insize 3287-3B, GROOVE MICROMETERS, outside A 2-3", inside B 2.05-3.05", 6974029778377
1 × $789.84
-
×
Dynabrade 92665 - 5" Dia. x 1-1/2" W Heavy Duty Pneumatic Tire, Flat Wall
1 × $35.81
-
×
Dynabrade 94542 End Plate
1 × $14.55
-
×
Dynabrade 92868 - 5" (127 mm) Dia. x 1-1/2" (38 mm) W Heavy Duty DynaWheel Pneumatic Wheel
1 × $80.44 -
×
Dynabrade 97165 Hang Plate
1 × $29.92 -
×
Dynabrade 93906 3" Dia. Continuous Rim Diamond Mounted Cut-Off Wheel
1 × $236.62 -
×
Dynabrade 78168 1-1/4" Dia. x 220 Grit S/C Non-Vacuum PSA DynaCut Disc 25/pack
1 × $17.68
3M 76742, Roloc Disc 777F, 36 YF-weight, TS, 2 in, Die RS200P, 7010328291
$1.36
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
