-
×
Dynabrade 94831 - 3/4" ID, 10' Long Air Hose Assembly, Female/ Male Fitting Ends Included
1 × $95.54 -
×
Dynabrade 95734 1/4" NPT Flow Control Dynaswivel
1 × $58.80 -
×
Dynabrade 93166 4" Dia. X 1/4" Dia. Shank, 80 Grit, A/O, Spindle-Mount Sanding Star
1 × $36.38 -
×
Dynabrade 11517 Idler Arm
1 × $105.91 -
×
Dynabrade 11420 Idler Arm
1 × $83.35 -
×
Dynabrade 54521 Carrier
1 × $334.25
-
×
Dynabrade 78832 Crimped Wire End Brush 3/4" Dia. x .014 x 7/8" Stainless Steel
1 × $20.06 -
×
Dynabrade 96197 Dowel Pin
1 × $2.07 -
×
Dynabrade 98344 1/4" BulkHead
1 × $97.41
-
×
Dynabrade 50149 3/8"-24 Female M14 x 2 Male, 1" Length
1 × $34.27 -
×
Dynabrade 60204 - 30,000 lb. Jack with No Pad
1 × $321.45 -
×
Dynabrade 54769 3" (76 mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder, .7 HP, 18,000 RPM, 3/8"-24 Spindle
1 × $1,112.00 -
×
Dynabrade 58446 8" Dia. Two-Hand Gear-Driven Sander, Central Vacuum, .45 HP, 900 RPM, PSA
1 × $610.00 -
×
Dynabrade 79193 1/2" W x 24" L 120 Grit Ceramic DynaCut Belts, 50/pack
50 × $3.93
Dynabrade 79490 4″ Dia. x 4″ W x 3/4″ Arbor Hole, Ultra Fine, NWN DynaBrite Finishing Flap Roll
$102.95
4″ Dia. x 4″ W x 3/4″ Arbor Hole, Ultra Fine, NWN DynaBrite Finishing Flap Roll, 5,000 RPM Max
Abrasive Specifications
Mfr. Part # 79490
| Abrasive Category | Non Woven Abrasives |
|---|---|
| Abrasive Diameter [inches] | 4″ |
| Abrasive Mineral Type | AO |
| Abrasive Shape | Wheels |
| Arbor Hole | 3/4″ |
| Abrasive Sub Shape | Flap Brush |
| Abrasive Width [inches] | 4″ |
| CE Certified | No |
| EAC Certified | No |
| Abrasive Backing Material | Woven Cloth |
| Abrasive Sub Shape 2 | Arbor Mount |
| Abrasive Tier | Good |
| EAN (UPC) Code | 0616026794047 |
| Quantity Each Pack | 1 |
| Abrasive Grit / Grade | Ultra Fine |
Related products
