-
×
3M 33440, Cubitron II File Belt, 33440, 80+, 10 mm x 330 mm (3/8 in x 13 in), 7100033195, 10 belts per carton, 5 cartons per case
50 × $23.71 -
×
3M 34550, Cubitron II Net Sheet Roll, 80+, 80 mm x 10 m, 7100283781, 6 Rolls/Case
6 × $28.94 -
×
3M 05692, Stikit Sanding Block Kit, 7000120058
6 × $156.64 -
×
3M 20911, PSA Cloth Disc 348D, 50 X-weight, 2 in x NH, Die 200P, 7000118871
200 × $0.82 -
×
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
5 × $10.20 -
×
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
10 × $24.73 -
×
Dynabrade 51810 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/8" Collet
1 × $715.47 -
×
3M 28126, Hookit Clean Sanding Disc 900DZ, 5 in 80 J-weight, Die 500LG, 7010290258
250 × $1.44 -
×
3M 81356, Venture Tape White Aluminum Foil Tape 1558HT, 72 mm a 45.7 m, 5.4 mil, 7010335933
16 × $70.43 -
×
Insize 6302, MICROMETER STAND, 6928640392467
1 × $1,184.47 -
×
3M 45020, Diamond Grade DG3 Reflective Digital Sheeting 4081UDS, Fluorescent Yellow, 30 in x 50 yd, 1 Roll/Case, 7100282390
1 × $2,038.81
-
×
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
10 × $16.71
3M 50757, Roloc Fibre Disc 501C, 60, TSM, 2 in, Die RS200PM, 7100126796
Discontinued, 3M Suggested Replacement-
| 7010534972 |
3M Roloc Fibre Disc 501C comes in smaller diameters and features sharp alumina zirconia mineral on a durable fiber backing, making it ideal for small weld removal and other medium pressure applications such as deburring or rust removal. Alumina zirconia offers a fast cut and consistent finish on nearly all metals.
Our heat resistant resin bond provides durability and long abrasive life under harsh conditions.
We chose alumina zirconia, an abrasive that fractures frequently to continually produce fresh sharp points and deliver a faster cut-rate than aluminum oxide. A synthetic mineral, it was developed for heavy stock removal and high pressure grinding.
Fiber discs are rigid discs that deliver a fast cut for grinding and weld removal, and come in a range of sizes to correspond to large or small welds. Fiber discs also work well for blending (creating a smooth surface after weld removal) and provide a consistent finish over the workpiece.
The 3M Roloc Fibre Disc 501C is available for use with the following Roloc attachment systems: TSM and TR. Please select discs with the attachment design made for your system.
Related products
$40.00
