-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
3M 45708, Cubitron II Hookit Cloth Disc 947A, 60+ X-weight, 6 in x NH, Die 600Z, 7100113142
200 × $3.25 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M 45710, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 6 in x NH, Die 600Z, 7100113139
200 × $2.53 -
×
3M 21762, Stikit Cloth Disc Roll 341D, 60 X-weight, 6 in x NH, Die 600Z, 7000118780
400 × $169.03 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 28850, Unitized Wheel Mandrel 28850, 2-1/8 in x 1/4 in x 3/4 in x 3/4 in, 7100082549
5 × $18.31 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86
3M 20645, Roloc Fibre Disc 501C, 36, TR, 2 in, Die R200P, 7010294442
This item has been Discontinued. Please see 3M suggested replacement item 7100100974.
3M Roloc Fibre Disc 501C comes in smaller diameters and features sharp alumina zirconia mineral on a durable fiber backing, making it ideal for small weld removal and other medium pressure applications such as deburring or rust removal. Alumina zirconia offers a fast cut and consistent finish on nearly all metals.
Our heat resistant resin bond provides durability and long abrasive life under harsh conditions.
We chose alumina zirconia, an abrasive that fractures frequently to continually produce fresh sharp points and deliver a faster cut-rate than aluminum oxide. A synthetic mineral, it was developed for heavy stock removal and high pressure grinding.
Fiber discs are rigid discs that deliver a fast cut for grinding and weld removal, and come in a range of sizes to correspond to large or small welds. Fiber discs also work well for blending (creating a smooth surface after weld removal) and provide a consistent finish over the workpiece.
The 3M Roloc Fibre Disc 501C is available for use with the following Roloc attachment systems: TSM and TR. Please select discs with the attachment design made for your system.
Related products
$1.72