-
×
3M 06506, Scotch Steel Gray Masking Paper, 06506, 6 in x 1000 ft, 6 per case, 7000045440
6 × $44.06 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 45U
2 × $57.10 -
×
3M 94701, Cubitron ll Cloth Belt 947A, 80+ X-weight, 1/4 in x 24 in, Fabri-lok, Single-flex, 7100141690, 200 per case
200 × $2.21 -
×
3M 06839, Booth Coating, 1 Galllon, 7000028421
4 × $99.52 -
×
Standard Abrasives 707947, A/O Straight Cartridge Roll, 1/2 in x 1-1/2 in x 1/8 in 40, 7100085874
100 × $0.58 -
×
3M 96096, Regalite Heavy Duty Hookit Discs 5RQC100-8, 5 in x 8 DH, P100 Grit, 7010301746
200 × $0.70 -
×
3M 87429, Final Finishing Pads 10199NA4PK, 3 3/4 in x 6 in x 5/8 in, Replaces 0000 Steel Wool, 7100096075, 4 pads per pack
6 × $3.12 -
×
3M 15041, Scotch Electrical Shielding Tape 24, 1 in x 15 ft (25 mm x 4,6 m), 7000031348
10 × $38.32 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38
3M 20645, Roloc Fibre Disc 501C, 36, TR, 2 in, Die R200P, 7010294442
This item has been Discontinued. Please see 3M suggested replacement item 7100100974.
3M Roloc Fibre Disc 501C comes in smaller diameters and features sharp alumina zirconia mineral on a durable fiber backing, making it ideal for small weld removal and other medium pressure applications such as deburring or rust removal. Alumina zirconia offers a fast cut and consistent finish on nearly all metals.
Our heat resistant resin bond provides durability and long abrasive life under harsh conditions.
We chose alumina zirconia, an abrasive that fractures frequently to continually produce fresh sharp points and deliver a faster cut-rate than aluminum oxide. A synthetic mineral, it was developed for heavy stock removal and high pressure grinding.
Fiber discs are rigid discs that deliver a fast cut for grinding and weld removal, and come in a range of sizes to correspond to large or small welds. Fiber discs also work well for blending (creating a smooth surface after weld removal) and provide a consistent finish over the workpiece.
The 3M Roloc Fibre Disc 501C is available for use with the following Roloc attachment systems: TSM and TR. Please select discs with the attachment design made for your system.
Related products
