We pre-wash Finesse-it™ Knit II Buffing Pads to minimize lint discharge. Our pads conform well on irregular surfaces and will remove finishing abrasive sand scratches, oxidation, paint surface defects. Finish results are dependent on specific polish used, coating type and the tool used. These pads are designed with our 3M™ Hookit™ attachment system for quick pad mounting and removal and to hold each pad securely in place during use. Hookit™ buffing pads quickly and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the pad.
Our line of wool buffing pads are generally more aggressive and easier to control than foam pads. They have a greater available cutting surface area due to the presence of thousands of fibers. These fibers provide faster cutting action than foam pads, Wool fibers hold the polish to provide even distribution of material and require less pressure from the operator. The nap helps wool pads glide and conform to contours, making them easier to control than foam pads. Because of their cutting ability, wool pads are effective for removing sanding scratches and perform best on rotary type buffing tools. Depending on the polish type, individual technique, composition of the coating, and the tool used, finishing with a wool pad may require a follow-up step with a foam pad and polish to remove micro-marring or swirl marks.
Our line of 3M™ Finesse-it™ products are specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. 3M™ Finesse-it™ products are an integral part of our recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass.

Dynabrade 91640 2" W x 36" L 180 Grit A/O DynaCut Belt, 10/pack
Dynabrade 93581 3/4" Dia. x 3-48 Female Center Thread, 150 Grit, A/O, 3-Ply, J-DynaCut Eyelet Star, 50/pack
Dynabrade 50796 Wet Sander Accessory Kit
Dynabrade 52439 3" (76 mm) Dia. Right Angle Diamond Cut-Off Wheel Tool
Dynabrade 15108 Knob Assembly
Dynabrade 96107 Motor Tune-Up Kit
Dynabrade 90338 3-1/2" W x 15-1/2" L 220 Grit A/O DynaCut Belt, 10/pack
Dynabrade 30200 Dynascaler Surface Preparation Tool, Over-Under, 1", Rear Exhaust, 2,100 RPM
Dynabrade 15336 Rubber Drive Wheel
Dynabrade 53511 - .5 hp Straight-Line 3" (76 mm) Extension Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 78703 3/4" x 3-48 Female Center Thread, Coarse, Dynabrite Surface Conditioning Eyelet Star, 50/pack
Dynabrade X51S 5" Dia. Non-Vacuum Dynorbital_ Extreme Random Orbital Sander, PSA W/ Speed Regulator
Dynabrade X61 6" (152 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/16" Orbit, PSA
Dynabrade 64206 33" (84 cm) W x 60" (152 cm) L Downdraft Sanding Table, 230 V (AC)
Dynabrade 79196 3-1/2" W x 15-1/2" L 60 Grit DynaCut Premium Ceramic Belt, 10/pack
Dynabrade 57895 Pad Base- Mini Dynabug
Dynabrade 78329 3" x 1" x 1/4 Shank, 120 Grit, Dynabrite Interleaf Wheel, 10/pack
Dynabrade 52590 2" Dia. Right Angle Disc Sander, Rear Exhaust, .33 HP, 18,000 RPM, 3/8"-24 Thread
Dynabrade 07107 Vane Set (5pk)
Dynabrade 52216 .5 hp 7 Degree Offset Die Grinder, Front Exhaust, Long Shank, 15,000 RPM, 1/4" Collet 