-
×
Standard Abrasives 714179, Aluminum Oxide Handy Roll, P240 J-weight, 1-1/2 in x 50 yd, 7100050575
1 × $41.26 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Norton 66261127733 - 2" X 50 Yard 60 Grit Metalite™ Aluminum Oxide Cloth Roll, 1 Each
1 × $69.86 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $10.47 -
×
3M 65749, Detector Loop Sealant 5000, 1 Liter, 3M 7000056794, 12 per case
12 × $64.70 -
×
Standard Abrasives 725012, Buff and Blend Cross Buff HS, A/O Medium, 1-1/2 in x 1/2 in x 2 Ply x 8-3, 7000046830
50 × $5.20 -
×
3M 20967, Portable Utility Cloth Roll 314D, P240 J-weight, 1 in x 20 yd, 7010290604
5 × $17.83 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
ACS CX1250 Diamond Belts, 1/2" X 24" 200u
12 × $8.20 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.54 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.66 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $12.14 -
×
3M 26597, Cloth Belt 341D, P320 X-weight, 1 in x 42 in, Film-lok, Single-flex, 7010294511, 200 per case
200 × $2.35 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Standard Abrasives 713276, Aluminum Oxide Handy Roll, P180 J-weight, 2 in x 50 yd, 7100037246
1 × $52.38 -
×
3M 05009, Utility Cloth Roll 211K, 100 J-weight, 1 in x 50 yd, Full-flex, 7100016843
5 × $64.59 -
×
3M 86745, Diamond Disc, 2" Roloc, 674W, 120 Mesh, TR, 7100022116, Box of 10
10 × $26.65 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
3M 01708, Scotch-Brite SST Deburring Wheel, ST-WL, 8S Fine, 8 in x 2 in x 3 in, 7000144590
2 × $267.05 -
×
Dynabrade 95722 Threaded Mandrels, 1/4" Dia x 1/4" Shank
5 × $39.79
Standard Abrasives 707605, Mandrel, 2560043, 3 in x 1/4 in x 1/4-20 TM-4, 7000121779
$6.38
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Mandrel enables users to access tight diameters and hard-to-reach surface areas by adding length to the abrasive and helping with a wide range of industrial applications.
Get Inside Hard-To-Reach Areas
Standard Abrasives™ Mandrel is a tool attachment designed to hold a Standard Abrasives™ Unitized Wheel. The 6mm shank diameter fits a 6mm power tool collet or drill chuck. An integral part of the overall application, the mandrel acts as a conduit, connecting the abrasive wheel with the rotary tool.
Easy Attachment
Some Standard Abrasives™ Unitized Wheels come with Quick Change Attachment Styles: TS, TR and TP. This mandrel was especially designed for center hole (CH) unitized wheels without Quick Change attachments. The mandrel facilitates easy fastening of the abrasive wheel to the tool. It drives 1″ diameter x 1″ wide x 3/16″ CH unitized wheels. Made with steel, it is exceptionally durable and long-lasting, so it can stand up to repeated wear and be used during heavy-duty applications.
Our Standard Abrasives™ Mandrel is a helpful accessory for tackling hard-to-reach areas and getting inside those tight spots that your projects may require.
Related products
