-
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,509.65 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 9U
2 × $57.10 -
×
3M 29834, Sanding Screen, 100 Grit, 18 in x NH, 7100160819
12 × $7.56 -
×
3M 55053, Cubitron II Cloth Belt 984F, 80+ YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7000119518, 200 per case
400 × $2.77 -
×
Dynabrade 91430 1/2" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.20 -
×
3M 20465, Hookit Clean Sanding Low Profile Disc Pad 861 Plus, 6 in x 3/8 in x 5/8 in CH x 5-16/24 in External 53 Holes Red Foam, 7100022038
10 × $37.88 -
×
3M 29844, Sanding Screen, 120 Grit, 16 in x NH, 7100160823
12 × $5.17 -
×
3M 31381, Cubitron II Hookit Marine Sanding Abrasive Disc 737U, 31381, 6 in, 120+, 7100062433
80 × $19.02 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 29837, Sanding Screen, 180 Grit, 17 in x NH, 7100160762
24 × $5.83 -
×
Standard Abrasives 701616, PSA A/O Disc, 12 in x NH, 50, 7010369977
10 × $6.01 -
×
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
10 × $1.77 -
×
3M 29823, Sanding Screen, 100 Grit, 20 in x NH, 7100160246
12 × $9.25 -
×
3M 20444, Hookit Clean Sanding Disc Pad Hook Saver, 5 in 44 Holes, 7000045012
20 × $3.79 -
×
3M 20350, Hookit Clean Sanding Low Profile Disc Pad, 3 in x 1/2 in x 1/4-20 External 3 Holes Red Foam, 7000028147
10 × $24.45 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
Dynabrade 50149 3/8"-24 Female M14 x 2 Male, 1" Length
1 × $32.00
3M 04020, Mini Mandrel 935, 2-7/8 in x 1/4 in, 7100009221
$11.03
Factory Stock, 7-10 Day Leadtime
The 3M Mini Mandrel is designed to work with your die grinder or rotary tool. This accessory grips a 1-inch wide strip of Scotch-Brite non-woven material allowing you to access tight internal diameters, typically for surface conditioning or polishing tasks.
Get a Grip
The 3M Mini Mandrel is an accessory that attaches to your die grinder or drill. It holds a 1-inch wide strip of Scotch-Brite non-woven material. Secure its shaft into the collet assembly of your drill chuck or rotary power tool to clean, polish or deburr the inside diameter of the workpiece.
The 2-7/8-inch long mini mandrel is useful in metal fabrication, woodworking and millwork, in the manufacture of medical instruments, turbine engine manufacture, plumbing, and other industries where finishing internal diameters is necessary.
Related products
