-
×
3M 06512, Scotch Steel Gray Masking Paper, 06512, 12 in x 1000 ft, 3 per case, 7010327747
3 × $88.10 -
×
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
1 × $715.47 -
×
3M 26582, Accuspray Refill Pack for PPS Series 2.0, Blue, 1.2 mm, 7100152952
5 × $10.20 -
×
3M 08027, Marine Grade Silicone Sealant, White, 304 mL Cartridge, 7000120476, 12/Case
12 × $38.10 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
20 × $12.65 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
3M 17098, Hood Assembly with Sealed Seams Inner Shroud and Premium Head Suspension S-857, 7000002350, 1 EA/Case
1 × $185.27 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
2 × $1,448.42 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M 76751, Roloc Disc 777F, 60 YF-weight, TS, 3 in, Die RS300V, 7010363900
200 × $1.43 -
×
Standard Abrasives 42735, A/O Flap Wheel 661408, 6 in x 1 in x 1 in 120, 7010369146
1 × $48.73 -
×
3M 45715, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 5 in x NH, D/F 5HL, Die 500FH, 7100113110
200 × $3.07 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33
-
×
3M 62602, Scotch-Weld Threadlocker TL22, Purple, 50 mL Bottle, 7100039159, 10/case
10 × $42.72 -
×
Standard Abrasives 880413, Buff and Blend GP Wheel, 3 in x 1 Ply x 1/4 in, A MED, 7100095202
10 × $6.36 -
×
Insize 7315-7, WIRELESS DATA TRANSFER SYSTEM, MULTICHANNEL RECEIVER (Type-C port), 6940561938784
1 × $316.26
-
×
3M 66261, Wind Protection Tape Edge Sealer W2600, 50 ml (1.7 fluid ounce), 7000049496, 12/Case
12 × $69.98 -
×
3M 07148, Dual Airline Back-Mounted Breathing Tube SA-2500/07148(AAD), 7000002006, 1 EA/Case
1 × $151.32 -
×
3M 49689, PSA Cloth Disc 348D, 60 X-weight, 10 in x NH, Die 1000C, 7010326501
10 × $5.76 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 45702, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, Die 300V, 7100113117
200 × $0.86 -
×
Dynabrade 51731 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 1/8" Collet
1 × $604.39 -
×
Insize THT-A104T-U, TEMPERATURE AND HUMIDITY TESTER, 27.56_33.46_27.56", 6974029771491
1 × $34,246.37
-
×
3M 10116, Synthetic Steel Wool Pads, 10116NA, #2 Medium, 2 in x 4 in, 7000047708
18 × $2.69 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $10.89 -
×
Dynabrade 02084 Angle Housing Assembly,Steel, Rear Exhaust
1 × $220.09 -
×
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
18 × $39.89 -
×
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
4 × $87.61 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M 19677, Scotch-Seal Industrial Sealant 800, Reddish Brown, 1 Gallon Drum, 7000000793, 4/Case
4 × $251.59 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93 -
×
3M 08973, Scotch-Weld Epoxy Potting Compound DP270, Clear, 48.5 mL Duo-Pak, 7100148730, 12/case
12 × $23.17 -
×
Standard Abrasives 872199, Quick Change TR A/O Unitized Wheel, 721, 2 in x 1/4 in, 7010368348
10 × $6.72 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33
Standard Abrasives 541034, Track Mandrel, 3/4 in x 1/4 in Shank, 7000121718
$14.80
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Mandrel enables users to access tight diameters and hard-to-reach surface areas by adding length to the abrasive and helping with a wide range of industrial applications.
Get Inside Hard-To-Reach Areas
Standard Abrasives™ Mandrel is a tool attachment designed to hold a Standard Abrasives™ Unitized Wheel. The 6mm shank diameter fits a 6mm power tool collet or drill chuck. An integral part of the overall application, the mandrel acts as a conduit, connecting the abrasive wheel with the rotary tool.
Easy Attachment
Some Standard Abrasives™ Unitized Wheels come with Quick Change Attachment Styles: TS, TR and TP. This mandrel was especially designed for center hole (CH) unitized wheels without Quick Change attachments. The mandrel facilitates easy fastening of the abrasive wheel to the tool. It drives 1″ diameter x 1″ wide x 3/16″ CH unitized wheels. Made with steel, it is exceptionally durable and long-lasting, so it can stand up to repeated wear and be used during heavy-duty applications.
Our Standard Abrasives™ Mandrel is a helpful accessory for tackling hard-to-reach areas and getting inside those tight spots that your projects may require.
