-
×
ACS Flap Disc, Type 29 (Curved) Full Diamond 4-1/2 X 5/8-11 60M, 333.FD4.5-60/T29
1 × $52.00 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
Dynabrade 57810 3-2/3" W x 7" L Dynabug Orbital Sander, Non-Vacuum, .28 HP, 10,000 RPM, 3/32" Orbit
1 × $490.00 -
×
Dynabrade 58034 1-1/4" Dia. Right Angle Mini-Orbital Sander, 4K RPM, .4Hp, Rear Exhaust
1 × $966.00 -
×
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
10 × $18.37 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
400 × $1.77 -
×
Dynabrade 58515 2-3/4" W x 7-3/4" L Dynabug II Orbital Sander, Central Vacuum, .11 hp, 8,000 RPM, 3/16" Orbit
1 × $281.00 -
×
3M 27464, Cloth Belt 340D, 50 X-weight, 4 in x 24 in, Fabri-lok, Single-flex, 7000119041, 25 per case
25 × $6.28 -
×
Dynabrade 53245 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 8,500 RPM, 5/8"-11 Spindle
1 × $1,591.00 -
×
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
5 × $4.74 -
×
3M Super Abrasives Roloc Disc, 2" Type-R, Medium AO High Strength, Box of 50
1 × $95.00 -
×
3M 19795, Utility Cloth Roll 314D, P400 J-weight, 1-1/2 in x 20 yd, 7100081717
10 × $47.61 -
×
Standard Abrasives 713296, Aluminum Oxide Handy Roll, P320 J-weight, 2 in x 50 yd, 7100034517
1 × $52.38 -
×
3M 76523, Cloth Belt 777F, 50 YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7000118456, 50 per case
50 × $16.15 -
×
Dynabrade 92115 1/2" W x 12" L 220 Grit A/O DynaCut Belt, 50/pack
100 × $1.29 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.95 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.91 -
×
Dynabrade 91430 1/2" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.29
-
×
3M 19769, Utility Cloth Sheet 314D, 9 in x 11 in P150 J-weight, 7000000357
250 × $1.57 -
×
Dynabrade 92209 1/8" W x 12" L 220 Grit A/O DynaCut Belt, 50/pack
50 × $1.02
-
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.55 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.54
Standard Abrasives 541034, Track Mandrel, 3/4 in x 1/4 in Shank, 7000121718
$16.26
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Mandrel enables users to access tight diameters and hard-to-reach surface areas by adding length to the abrasive and helping with a wide range of industrial applications.
Get Inside Hard-To-Reach Areas
Standard Abrasives™ Mandrel is a tool attachment designed to hold a Standard Abrasives™ Unitized Wheel. The 6mm shank diameter fits a 6mm power tool collet or drill chuck. An integral part of the overall application, the mandrel acts as a conduit, connecting the abrasive wheel with the rotary tool.
Easy Attachment
Some Standard Abrasives™ Unitized Wheels come with Quick Change Attachment Styles: TS, TR and TP. This mandrel was especially designed for center hole (CH) unitized wheels without Quick Change attachments. The mandrel facilitates easy fastening of the abrasive wheel to the tool. It drives 1″ diameter x 1″ wide x 3/16″ CH unitized wheels. Made with steel, it is exceptionally durable and long-lasting, so it can stand up to repeated wear and be used during heavy-duty applications.
Our Standard Abrasives™ Mandrel is a helpful accessory for tackling hard-to-reach areas and getting inside those tight spots that your projects may require.
