-
×
Dynabrade 51451 5"-8" Dia. 7 Degree Offest Two-Hand Rotary Buffer, .7 hp, 4,500 RPM, Rear Exhaust, 5/8"-11 Spindle Thread
1 × $926.00 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
2 × $2,712.00 -
×
Dynabrade 78425 4-1/2" Dia. x 3/8" Coarse DynaBrite Surface Conditioning Disc, 25/pack
50 × $6.68 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
2 × $2,022.00 -
×
Norton 66261014897 2" x 1/4" Bear-Tex NEX Rapid Blend AO Medium Grit TR (Type III) Non-Woven Wheel, 60 Each
60 × $4.78 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
3M 62612, Scotch-Weld Threadlocker TL71, Red, 10 mL Bottle, 7100039197, 10/case
10 × $14.12 -
×
Dynabrade 15336 Rubber Drive Wheel
2 × $76.45 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Dynabrade 11254 Contact Arm Ass'y, 4-3/4" Dia. x 1/2" W
1 × $533.42 -
×
Dynabrade 57113 Rotor/Vane Set
1 × $65.09 -
×
Dynabrade 78692 D16 Cartridge Roll Mandrel 3/16" Pilot Dia. x 1/2" Pilot Length, 1/4" Dia. Shank x 1-1/4" Shank Length
1 × $4.80 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Dynabrade 91425 1/4" W x 12" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.15 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
Dynabrade 01011 Vane Set (4pk)
1 × $27.37 -
×
Norton 66261014936 3" DIA X 1/8" Thick, Bear-Tex NEX Rapid Blend Quick-Change Type III Non-Woven Unified Wheel, 40 Each
40 × $11.64 -
×
Dynabrade 15101 Tension Arm (for Mini Dynafile II)
1 × $47.74 -
×
Dynabrade 93531 7" Mandrel for Sanding Stars w/ Flexible Tip, 1/4"-20 Male Thread
1 × $67.32 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.70 -
×
Dynabrade 51926 Vane Set (4pk)
1 × $29.53
-
×
Dynabrade 78689 D8 Cartridge Roll Mandrel 1/8" Pilot Dia. x 3/4" Pilot Length, 1/4" Shank Dia. x 1-1/4" Shank Length
1 × $3.18 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
Dynabrade 78176 2" Dia. Medium NWN VT DynaBrite TR Locking-Type Disc, 25/pack
25 × $1.98 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
Dynabrade 90875 2" Dia. Super Fine NWN DynaBrite Locking-Type Disc, 25/pack
25 × $43.25 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00
Standard Abrasives 541034, Track Mandrel, 3/4 in x 1/4 in Shank, 7000121718
$16.26
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Mandrel enables users to access tight diameters and hard-to-reach surface areas by adding length to the abrasive and helping with a wide range of industrial applications.
Get Inside Hard-To-Reach Areas
Standard Abrasives™ Mandrel is a tool attachment designed to hold a Standard Abrasives™ Unitized Wheel. The 6mm shank diameter fits a 6mm power tool collet or drill chuck. An integral part of the overall application, the mandrel acts as a conduit, connecting the abrasive wheel with the rotary tool.
Easy Attachment
Some Standard Abrasives™ Unitized Wheels come with Quick Change Attachment Styles: TS, TR and TP. This mandrel was especially designed for center hole (CH) unitized wheels without Quick Change attachments. The mandrel facilitates easy fastening of the abrasive wheel to the tool. It drives 1″ diameter x 1″ wide x 3/16″ CH unitized wheels. Made with steel, it is exceptionally durable and long-lasting, so it can stand up to repeated wear and be used during heavy-duty applications.
Our Standard Abrasives™ Mandrel is a helpful accessory for tackling hard-to-reach areas and getting inside those tight spots that your projects may require.
