-
×
Norton 66623335427, 2" Dia Vortex Rapid Prep Quick-Change Non-Woven Abrasive Disc, Medium Grade, 50 Each
50 × $1.70 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $9.52 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M 88892, PSA Cloth Disc 348D, 60 X-weight, 15 in x NH, Die 1500A, 7010360718
10 × $13.07 -
×
3M 923, Disc Pad Holder, 3 in 1/4 in Shank, 7000120560
10 × $8.10 -
×
3M 81284, Scotch-Weld High Strength Retaining Compound RT38, Green, 250 mL Bottle, 7010367436, 2/case
2 × $142.89 -
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
Dynabrade 51706 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
1 × $558.00 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
Dynabrade 51623 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $634.00 -
×
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
1 × $751.00 -
×
Insize HDT-LP200-DC, IMPACT DEVICE DC for HDT-LP200, 6940561948431
1 × $615.27 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
$7.45
Factory Stock, 7-10 Day Leadtime
3M Scotch-Brite Paint & Rust Stripper saves time by removing paint and rust fast on wood, metal and fiberglass
3M SandBlaster Pro 9099ES SP, 4″ Paint & Rust Stripper, Large Area, 1 disc/pak. SandBlasterPro Paint & Rust Stripper is flexible and is perfect for removing paint & rust from flat or contoured surfaces. Ideal for sanding on many surfaces, including wood, metal, and fiberglass. SandBlasterPro Paint & Rust Stripper disc will not discolor your sanding surface. Sanding should be done in a sequence, going from coarse to fine, skipping no more than one grit level.
