-
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
15 × $7.30 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $10.47 -
×
3M 76623, Roloc Disc 777F, 50 YF-weight, TR, 1 in, Die R100N, 7000045619
500 × $0.72 -
×
3M 29836, Sanding Screen, 60 Grit, 18 in x NH, 7100160820
12 × $11.73 -
×
Standard Abrasives 850034, Unitized Wheel Steel Screw Mandrel, 7/8 in x 1/4 in Shank, 7000121879
1 × $9.04 -
×
3M 86992, Diamond Disc, 3" Roloc, 674W, 120 Mesh, TR, 7100143477, Box of 5
1 × $59.95 -
×
Insize 1151-450AE, DIGITAL HEIGHT GAGE, 0-18?/0-450mm, 6940561979688
1 × $1,198.44 -
×
3M 86745, Diamond Disc, 2" Roloc, 674W, 120 Mesh, TR, 7100022116, Box of 10
10 × $26.65
-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $7,116.65 -
×
Insize 6144, ACCESSORY SET FOR DIGITAL CALIPERS, 6928640380839
1 × $85.16
-
×
3M 26137, PPS Series 2.0 Adapter, Type S41, Trapezoidal Thread - QCC, 7100135947
1 × $27.52 -
×
3M 97986, Hi-Strength 94 ET Cylinder Spray Adhesive, Red, Large Cylinder (Net Wt 26.2 lb), 7100018953
1 × $516.11 -
×
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
9 × $87.98 -
×
3M 14895, Cloth Belt 777F, 80 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010299926, 200 per case
200 × $5.08 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.91 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
ACS CX1250 Diamond Belts, 1/2" X 24" 45u
12 × $7.60
-
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $1.05
3M 88743, Disc Pad Hub, 2-1/2 in 5/8-11 Internal for Short, Shaft Tool, 7000120459
$29.45
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub has an internal threaded metal insert that threads onto the shaft of a sander and grinder to hold a disc pad face plate and fiber disc in place.
Our 3M Disc Pad Hub holds the face plate firmly in position to support a fiber disc with a 7/8 inch center hole, which is secured to the hub with a compatible retainer nut. The disc pad hub enables operators to select face plates with four different densities?Soft, Medium, Hard and Extra-Hard?offering the convenience of using a single power tool for multiple grinding applications. Face plates are sold separately.
