-
×
Dynabrade 57039 Adaptor, Stamped 57010, 12K RPM
1 × $86.36 -
×
Dynabrade 07102 Air Motor
1 × $1,195.79 -
×
Dynabrade 68101 Coolant Filtration System, 230 V (AC), 1 Phase, 50 Hz
1 × $4,051.00 -
×
Dynabrade 91648 2" W x 48" L 320 Grit A/O DynaCut Belt, 10/pack
10 × $6.78 -
×
Dynabrade 78666 1/2" Dia. x 1-1/2" W x 1/8" Center Hole, Tapered Cartridge Rolls, A/O, 180 Grit, 100/pack
100 × $98.00 -
×
Dynabrade X61 6" (152 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/16" Orbit, PSA
1 × $223.00 -
×
Dynabrade 48327 .4 hp Straight-Line Die Grinder, Rear Exhaust, 30,000 RPM, 1/4" Collet
1 × $437.00 -
×
Dynabrade 15111 Felt Silencer
1 × $5.04 -
×
Dynabrade 79143 1/8" W x 24" L 80 Grit Ceramic DynaCut Belts, 50/pack
50 × $2.34 -
×
Dynabrade DAQ6 6" Dia. National Detroit Dual-Action Sander, Non-Vacuum
1 × $466.00 -
×
Dynabrade 01025 O-Ring
1 × $2.07 -
×
Dynabrade 58066 Housing for Model 58502
1 × $114.55
-
×
Dynabrade 91327 11-1/4" Dia. x 60 Micron A/O Hook "O"-style Vacuum Microfinishing Disc, 10/Box
10 × $9.82 -
×
Dyanbrade NF1B NitroFile Abrasive Belt Tool with 11206 Contact Arm and 15352 Drive Wheel, 5.hp 7 Degree Offset, 20,000 RPM, Gearless, Front Exhaust
1 × $541.00 -
×
Dynabrade 53594 Housing for Model 51812, 100,000 RPM
1 × $272.09 -
×
Dynabrade 60084 Plunger
1 × $7.52
-
×
Dynabrade 18408 Throttle Lever
1 × $12.18
-
×
Dynabrade 59095 Speed Regulator, Silver, w/Low Speed
1 × $21.07
-
×
Dynabrade 52439 3" (76 mm) Dia. Right Angle Diamond Cut-Off Wheel Tool
1 × $754.00 -
×
Dynabrade 78688 D6 Cartridge Roll Mandrel 1/8" Pilot Dia. x 1/2" Pilot Length, 1/8" Shank Dia. x 1" Shank Length
1 × $4.54 -
×
Dynabrade 42733 Carbon Brush
1 × $8.72 -
×
Dynabrade 78324 2" Dia. x 1" W x 1/4" Shank, 180 Grit, A/O DynaCut Flap Wheel, 10/pack
10 × $16.56 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.38
3M 88132, Hookit Disc Hand Pad, 5 in x 1/4 in, 7000120500
$7.50
Factory Stock, 7-10 Day Leadtime
3M Hookit Disc Hand Pads provide improved operator comfort and increased surface uniformity when hand sanding. These foam backup pads utilize a Hookit attachment style and come in two forms, either with a contoured dome-shaped hand hold area, or a flat back with an elastic hand band that allows the operator to sand without “gripping” the pad.
Solutions for Sanding by Hand
The bright yellow dome-shaped grip and the alternative elastic hand-band style of the 3M Hookit Disc Hand Pad solve the challenge of sanding by hand, making it less fatiguing, protecting the operator’s hand and preserving some tactile sense of the surface.
Soft and medium density foam construction conforms easily to surfaces while distributing the pressure of fingers that otherwise promote uneven finishes and leave finger marks. The contoured shape is comfortable in the hand and requires less gripping force. Firm density foam construction is appropriate for use when hand sanding flat surfaces.
The 3M Hookit attachment system makes swapping Hookit Discs a breeze between applications.
Recommended Applications
The 3M Hookit Disc Hand Pad is an excellent tool when hand sanding by hand for paint preparation. Use with A- or C-weight Hookit Discs is recommended.
