-
×
Dynabrade 90544 1/2" W x 44" L 60 Grit Z/A DynaCut Belt, 50/pack
50 × $3.20 -
×
Dynabrade 95745 1/4" NPT Speed Regulator
1 × $81.76 -
×
Dynabrade 53502 - .5 hp Straight-Line 7-1/4" Extension Die Grinder, Rear Exhaust, 20,000 RPM, 1/4" Collet
1 × $649.00 -
×
Dynabrade 52276 .7 hp Straight-Line Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
1 × $534.42 -
×
Dynabrade 78008 1/2" W x 12" L Very Fine Non-Woven DynaBrite Belts, 10/pack
10 × $4.69 -
×
Dynabrade 50014 3/8" (.375) Capacity Collet Sleeve
1 × $33.47 -
×
Dynabrade 64492 36" (91 cm) W x 72" (183 cm) L Downdraft Sanding Table, 220 V (AC)
1 × $6,710.11 -
×
Dynabrade 54734 4" (102 mm) Dia. Right Angle Type 1 Cut-Off Tool, Rear Exhaust, .7 HP, 13,500 RPM, 3/8"-24 Spindle
1 × $807.31 -
×
Dynabrade 50122 3" Dia. Disc Backup Pad Pad, 3/8"-24 Thread, Hook 'N Loop
1 × $23.79 -
×
Dynabrade 53233 6" (152 mm) Dia. Type 11 Vertical Cup Wheel Grinder, 2 HP, 6,000 RPM, 5/8"-11 Spindle
1 × $1,464.17 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33
3M 84584, Cloth Belt 777F, 50 YF-weight, 3 in x 264 in, Film-lok, Single-flex, 7010309169, 5 per case
$61.22
Factory Stock, 7-10 Day Leadtime
Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.
Deburr, Blend and Finish Stainless Steel
3M Cloth Belt 777F contains a grinding aid that reduces running temperatures when used on heat-sensitive alloys like stainless steel, nickel alloys and cobalt alloys. The abrasive grain is bonded to the backing with resin to maintain durability under high heat and pressure. This belt is recommended for use on stainless steel or other exotic metal alloys for dimensioning parts, deburring, blending, and finishing castings and forgings.
Ceramic Abrasive Grain Boosts Performance
For increased performance, 777F products feature aluminum oxide blended with 3M ceramic abrasive grain for a harder, longer-lasting abrasive. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes the Cloth Belt 777F an excellent choice for moderate stock removal and surface preparation.
Sized to Suit Your Needs
These abrasive belts are available in various widths and lengths for sanding both wood and metal. We offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough-cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Find Your Flex
Belts come with various flexibilities and splices that join the belt ends. Our 3M Cloth Belt 777F has a film splice for added strength when grinding in high pressure applications. When greater flexibility may be needed to increase conformity or for a softer touch for finishing and blending, an L-flex provides more flexibility than the standard flex, and a full flex belt is the most flexible.
Applications
- Moderate stock removal
- Deburring stainless steel
- Finishing stainless steel
- Surface preparation
