-
×
Dynabrade 11642 Contact Wheel Ass'y, 4" Dia. x 5/8" W x 5/8" I.D., Scoop Face, 40 Duro Rubber
1 × $175.38 -
×
Dynabrade 01480 Vane Set (4pk)
1 × $24.36 -
×
Dynabrade 52710 2" (51 mm) Dia. Right Angle Depressed Center Wheel Grinder, .4 HP, 12,000 RPM, 3/8"-24 Spindle
1 × $749.58 -
×
Dynabrade 95850 - 1/4" Female Coupler with 1/4" Female Plug Assembly
1 × $30.38 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $431.21 -
×
Dynabrade 91428 1/2" W x 12" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.20 -
×
Dynabrade 78710 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, 5/pack
5 × $1.46 -
×
Dynabrade 95263 Open-End Wrench, 17 mm
1 × $5.96 -
×
Dynabrade 56323 3-7/8" x 5-5/8" Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
1 × $33.47 -
×
Dynabrade 52218 .5 hp 7 Degree Offset Die Grinder, Front Exhaust, Long Shank, 20,000 RPM, 1/4" Collet
2 × $508.18 -
×
Dynabrade 79892 8" Dynacut 120 Grit Extreme Orange Scalloped Edge Discs, 25 per box
1 × $60.29 -
×
Dynabrade 56316 3" x 4-1/4" Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
1 × $31.98 -
×
Dynabrade 21457 ND3071, Red Plastic Cover
1 × $20.29 -
×
Dynabrade 94992 1/4" Male Composite-Style Coupler with 1/4" Male Plug Assembly
1 × $44.05 -
×
Dynabrade 78860 Crimped Wire Radial Wheel Brush 2" Dia. x .006 x 7/16" Steel
1 × $16.96 -
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.20
-
×
Dynabrade 51854 .4 hp Trim Router (Complete), 30,000 RPM, 1/4 Collet
1 × $650.75 -
×
Dynabrade 90499 1/2" W x 34" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $2.12 -
×
Dynabrade 58435 6" Dia. DynaLocke Dual-Action Sander, Non-Vacuum
1 × $560.66 -
×
Dynabrade 56355 3" x 4-1/4" Non-Vacuum Dynabug II Pad, Vinyl-Face
1 × $30.50 -
×
Dynabrade 50302 4" (102 mm) Dia. Right Angle Depressed Center Wheel Grinder, 1 HP, 12,000 RPM, 3/8"-24 Spindle
1 × $1,233.26 -
×
Dynabrade 64201 33" (84 cm) W x 41" (104 cm) L Downdraft Sanding Table, 115 V (AC)
1 × $5,500.01 -
×
Dynabrade 68101 Coolant Filtration System, 230 V (AC), 1 Phase, 50 Hz
1 × $3,859.84 -
×
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
1 × $9.25 -
×
Dynabrade 54783 3" (76 mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder, Steel Housing, .7 HP, 18,000 RPM, 3/8"-24 Spindle
1 × $1,024.22 -
×
Dynabrade 64001 SuperFinisher, 230 Volts (AC), 1 Phase, 60 Hz
1 × $18,455.12 -
×
Dynabrade 78167 1-1/4" Dia. x 180 Grit S/C Non-Vacuum PSA DynaCut Disc 25/pack
1 × $16.50 -
×
Dynabrade 82489 6" Dia. x 100 Grit A/O Vacuum PSA Filmbac DynaCut Disc, 100/Pack
100 × $1.37 -
×
Dynabrade 94112 7" Dynacut Diamond Segmented Rim Cut-Off Blade
1 × $112.48 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14
3M 82229, Cloth Belt 777F, P120 YF-weight, 1/4 in x 24 in, Fabri-lok, Full-flex, 7000118444, 200 per case
$2.26
Factory Stock, 7-10 Day Leadtime
Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.
Deburr, Blend and Finish Stainless Steel
3M Cloth Belt 777F contains a grinding aid that reduces running temperatures when used on heat-sensitive alloys like stainless steel, nickel alloys and cobalt alloys. The abrasive grain is bonded to the backing with resin to maintain durability under high heat and pressure. This belt is recommended for use on stainless steel or other exotic metal alloys for dimensioning parts, deburring, blending, and finishing castings and forgings.
Ceramic Abrasive Grain Boosts Performance
For increased performance, 777F products feature aluminum oxide blended with 3M ceramic abrasive grain for a harder, longer-lasting abrasive. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes the Cloth Belt 777F an excellent choice for moderate stock removal and surface preparation.
Sized to Suit Your Needs
These abrasive belts are available in various widths and lengths for sanding both wood and metal. We offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough-cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Find Your Flex
Belts come with various flexibilities and splices that join the belt ends. Our 3M Cloth Belt 777F has a film splice for added strength when grinding in high pressure applications. When greater flexibility may be needed to increase conformity or for a softer touch for finishing and blending, an L-flex provides more flexibility than the standard flex, and a full flex belt is the most flexible.
Applications
- Moderate stock removal
- Deburring stainless steel
- Finishing stainless steel
- Surface preparation
