-
×
Dynabrade 90473 1/4" W x 30" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
Dynabrade 92751 2" W x 50' L 3 Micron, Diamond Lapping Film DynaCut Roll
1 × $1,194.70 -
×
Dynabrade 42644 Contact Arm Ass'y, 5/8" Dia. x 3/8" W, Rubber Wheel, with Stroke Sander Arm 1/2" (13 mm) W Platen
1 × $90.63 -
×
Dynabrade 52212 .5 hp 7 Degree Offset Die Grinder, Front Exhaust, Short Shank, 20,000 RPM, 1/4" Collet
1 × $533.00 -
×
Dynabrade 96237 Dowel Pin
1 × $2.07
-
×
Dynabrade 96156 O-Ring
1 × $2.07
-
×
Standard Abrasives 863205, S/C Unitized Wheel, 632, 1 in x 1 in x 3/16 in, 7000122047
10 × $6.09 -
×
Dynabrade 31969 - 1-1/4" Conductive Hose, 0.26M Long
1 × $22.24
-
×
Dynabrade 52932 1/4" Drill, .4 HP, Rear Exhaust, 1,000 RPM
1 × $940.00 -
×
Dynabrade 96047 Motor Tune-Up Kit
1 × $141.70 -
×
Dynabrade 92759 3" W x 150' L 3 Micron A/O Lapping Film DynaCut Roll
1 × $191.12 -
×
Dynabrade 56250 5" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
1 × $31.38 -
×
Dynabrade 79375 6" Dia. x 80 Grit A/O Hook Multi-Hole Vacuum Film-Backed DynaCut Disc, 100/Box
100 × $1.63
3M 80510, Roloc Disc 777F, P120 YF-weight, TR, 1 in, Die R100N, 7000045622
$0.68
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
