-
×
Dynabrade 57400 2-3/4" (70 mm) W x 8" L Dynaline Sander, Non-Vacuum
1 × $818.00 -
×
Dynabrade 59183 6" Dia. Dynorbital-Spirit Random Orbital Sander, Central Vacuum, 3/32" Orbit
1 × $240.00 -
×
Dynabrade 56668 Housing Assy for Model 59114; 12,000 RPM
1 × $102.45 -
×
Dynabrade 93658 3" Dia. x 3/8" CH 40/50 Grit Gulleted/Slotted Diamond Cut-Off Wheel
1 × $125.34 -
×
3M 90122, Scotch-Brite Deburr and Finish Pro Unitized Wheel, DP-UW, 8C Coarse+, 3 in x 1/2 in x 1/4 in, 7100105530
20 × $20.50 -
×
Dynabrade 51348 2" Dia. Locking-Type Disc Pad, Medium Density, 1/4"-20 Thread
1 × $16.44 -
×
Dynabrade 11231 Contact Arm Ass'y, 3/4" Dia. x 1/2" W, Rubber Wheel, with 1/2" W Platen
1 × $73.36 -
×
Dynabrade 92100 3" W x 10-11/16" L 40 Grit A/Z DynaCut Belt, 10/pack
10 × $4.56 -
×
Dynabrade 52986 3/8" Drill, .4 HP, Rear Exhaust, 500 RPM
1 × $980.00 -
×
Dynabrade 52632 4-1/2" Dia Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12,000 RPM, 5/8"-11 Spindle
1 × $860.00 -
×
Dynabrade 55422 Housing Assembly for 52856, 60,000 RPM
1 × $117.28
-
×
Dynabrade 61461 Raptor Vac Electric Portable Vacuum System, 7.9 Gallon, 120 V
1 × $17,574.00 -
×
Dynabrade 30430 Housing for Model 51307
1 × $128.46
-
×
Dynabrade 57546 Housing
1 × $107.62 -
×
Dynabrade 57898 Clip-Dynabug II
1 × $16.99
-
×
Dynabrade 50947 - 8" (203 mm) Dia. Non-Vacuum Wet/Dry Sander Disc Pad, Hook-Face, Short Nap
1 × $42.98 -
×
Dynabrade 57582 5" Dia. Wet Dynorbital Supreme Random Orbital Sander, Basic, 3/32" Orbit
1 × $404.00
3M 77642, Cloth Belt 777F, 80 YF-weight, 1/4 in x 24 in, Fabri-lok, Full-flex, 7100096508, 200 per case
$2.54
Factory Stock, 7-10 Day Leadtime
Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.
Deburr, Blend and Finish Stainless Steel
3M Cloth Belt 777F contains a grinding aid that reduces running temperatures when used on heat-sensitive alloys like stainless steel, nickel alloys and cobalt alloys. The abrasive grain is bonded to the backing with resin to maintain durability under high heat and pressure. This belt is recommended for use on stainless steel or other exotic metal alloys for dimensioning parts, deburring, blending, and finishing castings and forgings.
Ceramic Abrasive Grain Boosts Performance
For increased performance, 777F products feature aluminum oxide blended with 3M ceramic abrasive grain for a harder, longer-lasting abrasive. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes the Cloth Belt 777F an excellent choice for moderate stock removal and surface preparation.
Sized to Suit Your Needs
These abrasive belts are available in various widths and lengths for sanding both wood and metal. We offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough-cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Find Your Flex
Belts come with various flexibilities and splices that join the belt ends. Our 3M Cloth Belt 777F has a film splice for added strength when grinding in high pressure applications. When greater flexibility may be needed to increase conformity or for a softer touch for finishing and blending, an L-flex provides more flexibility than the standard flex, and a full flex belt is the most flexible.
Applications
- Moderate stock removal
- Deburring stainless steel
- Finishing stainless steel
- Surface preparation
