-
×
Standard Abrasives 78529, Ceramic Pro Type 29 Flap Disc, 645141, 7 in x 5/8-11 80 Y-weight, 7010331466
10 × $17.89 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
3M 97957, Hi-Strength Spray Adhesive 90 CA, Low VOC <25%, Clear, 24 fl oz Can (Net Wt 19.0 oz), 7000121418, 12/Case
12 × $21.93 -
×
3M 99437, Drywall Sanding Screens, 4-3/16 in x 11-1/4 in, 150 grit, 7010370929, 10 sheets per pack
20 × $14.12 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
2 × $0.86 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73
-
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
Dynabrade 78602 1/2" Dia. x 1" W x 1/8" Center Hole, 60 Grit, 100/pack
100 × $0.62 -
×
3M 91004, Drywall Sanding Sponge CP-042-4PK, Single Angle, 4-7/8 in x 2-7/8 in x 1 in, Fine, 7100111452, 4/pack
6 × $5.94 -
×
3M 99436, Drywall Sanding Screens, 4-3/16 in x 11-1/4 in, 220 grit, 7000047623, 10 sheets per pack
10 × $14.16 -
×
Standard Abrasives 32920, PSA A/O Disc, 708027, 6 in x NH, 120, 7100083004
50 × $1.27 -
×
3M 93284, Drywall Sanding Sponge 9095DC-NA-4PK, Dual Grit Block, 2-7/8 in x 4-7/8 in x 1 in, Fine/Medium, 7100140504, 4/pack
6 × $5.21 -
×
3M 08367, Urethane Seam Sealer, Black, 310 mL Cartridge, 7000119968, 12 per case
12 × $26.40 -
×
3M 71346, 675L, 1" X 120", 125u, Diamond Microfinishing Film Belts, 7010534823
1 × $97.89 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
480 × $8.38 -
×
Dynabrade 92116 1/2" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $94.50 -
×
3M 55065, Cubitron II Cloth Belt 984F, 36+ YF-weight, 3/4 in x 20-1/2 in, Fabri-lok, Single-flex, 7000148169, 200 per case
200 × $5.65 -
×
3M 10118, Synthetic Steel Wool Pads, 10118NA, #0 Fine, 7000126148
18 × $2.69 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
20 × $12.65 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
200 × $1.72 -
×
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
5 × $10.20 -
×
Standard Abrasives 710870, Cartridge Roll Mandrel, 1/8 in x 1/2 in x 1/4 in x 1-1/4 in x 2-1/4 in CM-7, 7000121794
5 × $4.71 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
50 × $33.94 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 45U
2 × $171.30 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 20u
12 × $7.60 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61
3M 76750, Roloc Disc 777F, 60 YF-weight, TS, 2 in, Die RS200P, 7010299188
$1.12
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
