-
×
Standard Abrasives 811027, Type 27 Cleaning Disc, 4-1/2 in x 1/2 in x 7/8 in, 7000046837
5 × $14.80 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 85372, Cloth Belt 777F, 80 YF-weight, 1/2 in x 12 in, Fabri-lok, Full-flex, 7000118397, 200 per case
400 × $2.10 -
×
3M Super Abrasives Roloc Disc, 2" Type-R, Medium AO High Strength, Box of 50
1 × $77.50 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
1000 × $0.67 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $871.15 -
×
Dynabrade 92207 1/8" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.77 -
×
Dynabrade 11254 Contact Arm Ass'y, 4-3/4" Dia. x 1/2" W
1 × $508.22 -
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
2 × $94.50 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $9.52 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,493.91 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $688.35 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
2 × $370.16 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
Standard Abrasives 42621, A/O Flap Wheel 621406, 1 in x 1 in x 1/4-20 in 80, 7010369106, 10 per case
10 × $6.69 -
×
3M 45719, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 6 in x NH, D/F 6HL, Die 600HZ, 7100113143
200 × $4.29 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.52 -
×
Standard Abrasives 863110, A/O Unitized Wheel, 631, 2 in x 1/4 in x 1/4 in, 7000144629
10 × $5.31 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
1 × $502.78 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M 87147, PSA Cloth Disc 777F, 5 x NH, 36 YF-weightt, 7010308524
250 × $3.18 -
×
3M 05206, Marine Adhesive Sealant 5200, White, 1 oz Tube, 7010325697, 12/Case
12 × $9.29 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 05444, Stikit Hand File Board, 2-3/4 in x 16 in, 7000045763
1 × $75.21 -
×
3M 01664, Scotch-Brite Light Deburring Wheel, LD-WL, 7S Fine, 6 in x 2 in x 1 in, 7100095035
2 × $153.93 -
×
3M 20227, Scotch-Seal Metal Sealant 2084, Silver, 5 oz Tube, 7000046343, 36/Case
36 × $23.01 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 19769, Utility Cloth Sheet 314D, 9 in x 11 in P150 J-weight, 7000000357
250 × $1.37 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38
3M 76623, Roloc Disc 777F, 50 YF-weight, TR, 1 in, Die R100N, 7000045619
$0.65
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
