-
×
Standard Abrasives 850034, Unitized Wheel Steel Screw Mandrel, 7/8 in x 1/4 in Shank, 7000121879
1 × $7.93 -
×
Standard Abrasives 42610, A/O Flap Wheel 621105, 1 in x 1/2 in x 1/4-20 in 60, 7010369103, 10 per case
10 × $6.51 -
×
3M 26137, PPS Series 2.0 Adapter, Type S41, Trapezoidal Thread - QCC, 7100135947
1 × $25.96 -
×
3M 85492, Scotch Foil Tape 3311, Silver, 2 in x 10 yd, 3.6 mil, 2MMX1200M, 7010334860
24 × $5.52 -
×
3M 06524, Scotch Steel Gray Masking Paper, 06524, 24 in x 1000 ft, 1 per case, 7000045442
1 × $176.19 -
×
Dynabrade 95541 Grease Gun
1 × $31.98 -
×
3M 94717, Cubitron ll Cloth Belt 947A, 80+ X-weight, 1 in x 30 in, Fabri-lok, Single-flex, 7010294445, 200 per case
200 × $3.73 -
×
Dynabrade 82577 1/2" W x 24" L 80 Grit Ceramic DynaCut Belt, 50/pack
50 × $3.19 -
×
3M 15041, Scotch Electrical Shielding Tape 24, 1 in x 15 ft (25 mm x 4,6 m), 7000031348
10 × $38.32 -
×
Standard Abrasives 727087, Surface Conditioning Band, 1 in x 1 in MED, 7100096389
10 × $4.78 -
×
Dynabrade 51702 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 3/32" Collet
1 × $531.79 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
Standard Abrasives 42655, A/O Flap Wheel 624406, 2-1/2 in x 1 in x 1/4-20 in 80, 7010369118, 10 per case
10 × $11.09 -
×
Dynabrade 60052 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 35,000 RPM, 3/32" Collet
1 × $976.11 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
1000 × $0.73
-
×
3M 16556, Scotch-Brite Light Duty Hand Pad 6448B, HP-HP, 6 in x 9 in, 7010329300, 60 ea/Case
1 × $83.29 -
×
Dynabrade 78425 4-1/2" Dia. x 3/8" Coarse DynaBrite Surface Conditioning Disc, 25/pack
25 × $6.23 -
×
3M 10119, Synthetic Steel Wool Pad 10119NA, 0000 Super Fine, 7000126181
18 × $2.69 -
×
3M 45719, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 6 in x NH, D/F 6HL, Die 600HZ, 7100113143
200 × $4.29 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 45699, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 3 in x NH, Die 300V, 7100113114
200 × $1.38 -
×
3M 33439, Cubitron II File Belt, 33439, 60+, 10 mm x 330 mm (3/8 in x 13 in), 7100033194, 10 belts per carton, 5 cartons per case
50 × $23.71 -
×
3M 97106, Cartridge Roll 341D, 80 X-weight, 5/8 in x 1-1/2 in x 1/8 in, 7010327460
100 × $0.93 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00
3M 76523, Cloth Belt 777F, 50 YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7000118456, 50 per case
$14.69
Factory Stock, 7-10 Day Leadtime
Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.
Deburr, Blend and Finish Stainless Steel
3M Cloth Belt 777F contains a grinding aid that reduces running temperatures when used on heat-sensitive alloys like stainless steel, nickel alloys and cobalt alloys. The abrasive grain is bonded to the backing with resin to maintain durability under high heat and pressure. This belt is recommended for use on stainless steel or other exotic metal alloys for dimensioning parts, deburring, blending, and finishing castings and forgings.
Ceramic Abrasive Grain Boosts Performance
For increased performance, 777F products feature aluminum oxide blended with 3M ceramic abrasive grain for a harder, longer-lasting abrasive. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes the Cloth Belt 777F an excellent choice for moderate stock removal and surface preparation.
Sized to Suit Your Needs
These abrasive belts are available in various widths and lengths for sanding both wood and metal. We offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough-cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Find Your Flex
Belts come with various flexibilities and splices that join the belt ends. Our 3M Cloth Belt 777F has a film splice for added strength when grinding in high pressure applications. When greater flexibility may be needed to increase conformity or for a softer touch for finishing and blending, an L-flex provides more flexibility than the standard flex, and a full flex belt is the most flexible.
Applications
- Moderate stock removal
- Deburring stainless steel
- Finishing stainless steel
- Surface preparation
