-
×
Insize 3236-5B, OUTSIDE MICROMETER FOR LEFT OR RIGHT HAND, 4-5", 6928640382277
1 × $153.13 -
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
50 × $38.92 -
×
Insize 7332, SPINDLE LIFT KNOB, 6928640312649
1 × $4.64
-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 97979, Hi-Strength 94 ET Cylinder Spray Adhesive, Clear, Large Cylinder (Net Wt 26.2 lb), 7000144615
1 × $516.11 -
×
3M 45015, Diamond Grade DG3 Reflective Digital Sheeting 4090UDS, White, 24 in x 50 yd, 1 Roll/Case, 7100282694
1 × $1,570.24
-
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.77 -
×
Air Turbine Tools 201SV - 3mm Straight Hand Tool Series with Brake, 90,000 RPM, 32173
1 × $605.00 -
×
3M 28006, NX Hook and Loop Paper Disc, P120 C-weight, 6 in x NH, D/F 6 HL, 7010326592
250 × $0.35 -
×
Insize 3294-2, NON ROTATING SPINDLE DISK MICROMETER, 1-2", 6928640328169
1 × $294.53
-
×
Dynabrade 98265 3/8" Female Coupler with 3/8" Male Plug Assembly
1 × $90.88 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.46
3M 70166, Hookit Soft Interface Disc Pad, 5 in x 1/2 in, 7000045754
$9.18
Factory Stock, 7-10 Day Leadtime
3M Soft Interface Disc Pad is constructed of _ inch soft density foam with a 3M Clean Sanding hole pattern to allow dust extraction and minimize loading during sanding. The soft foam construction enables the pad to conform to edges and contours, making it a good match for sensitive workpieces where gouging and marring is a top concern.
Providing Cushion and Conformability
3M Soft Interface Disc Pad provides a greater cushion and more conformability than a pad with medium density foam. Use this pad to reduce edge cutting when the pad is tipped on edge and maintain closer contact with the edge while maximizing dust extraction. The pad contains a series of uniquely designed holes which match those in 3M Clean Sand Back Up Pads, allowing sanding dust to be pulled through the holes and away from the sanding surface. This improves the work environment and prolongs disc life.
Easy Attachment
The Soft Interface Disc Pad has two sides. One side features loop material, which attaches to the back up pad used on the sanding tool. The opposite side contains hook material, which attaches to the Hookit sanding disc of choice.
Altogether, our 3M Soft Interface Disc Pad is ideal for operators who seek an added level of conformability for their sanding projects. The responsive foam design, attachment system and Clean Sanding hole pattern combine to cushion the workpiece, minimize dust and ? ultimately ? get the job done.
