-
×
3M 66834, PELTOR X1/X2 Earmuff Probed Test Cushions 393-3001-2, 2 EA/Case, 7100062126
1 × $28.88 -
×
3M 66634, Cloth Belt 341D, 80 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118866, 20 per case
20 × $11.10 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $482.25 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
400 × $1.54 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.46
-
×
3M 27471, Cloth Belt 340D, 3 in x 24 in P100 X-weight, 7010300094, 50 per case
50 × $2.95 -
×
3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
200 × $3.81 -
×
Standard Abrasives 707505, PSA A/O Disc, 12 in x NH, 40 Grit, 7010369974
10 × $6.35 -
×
3M 05579, Cloth Belt 577F, 80 YF-weight, 2 in x 48 in, Film-lok, Single-flex, 7010308379, 50 per case
50 × $6.29 -
×
3M 26597, Cloth Belt 341D, P320 X-weight, 1 in x 42 in, Film-lok, Single-flex, 7010294511, 200 per case
200 × $2.35 -
×
3M 69078, Trizact Cloth Belt 307EA, A80 JE-weight, 3 in x 132 in, Film-lok, Full-flex, 7010299168, 50 per case
50 × $29.11 -
×
3M 64070, Contractor Grade Pro Strength Duct Tape 3979, Silver, 1.88 in x 60 yd, 7010375912
24 × $10.13 -
×
3M 71346, 675L, 1" X 120", 125u, Diamond Microfinishing Film Belts, 7010534823
1 × $103.76 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.46 -
×
3M 16151, PTFE Glass Cloth Tape 5451, Brown, 3/4 in x 36 yd, 5.6 mil, 7000050135
12 × $160.60 -
×
3M 66615, Cloth Belt 341D, 50 X-weight, 3 in x 21 in, Fabri-lok, Single-flex, 7000118855, 25 per case
25 × $3.54 -
×
3M 35829, Hookit Dust Extraction Flexible Sanding Block Kit, 7100259119
10 × $106.99 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $10.47 -
×
3M 36516, Green Corps Abrasive File Belt, 40 grit, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100225352, 20 Belts Per Carton, 5 Cartons Per Case
5 × $56.22 -
×
3M 50216, Temflex Cotton Friction Tape 1755, 3/4 in x 82-1/2 ft, Black, 7010297809
60 × $11.44 -
×
3M 80510, Roloc Disc 777F, P120 YF-weight, TR, 1 in, Die R100N, 7000045622
500 × $0.68 -
×
Standard Abrasives 541008, Quick Change TS Firm Disc Pad, 2 in, 7100027571
5 × $20.53 -
×
3M 67117, PELTOR Earmuffs X1P5E, Forestry Orange, 10 EA/Case, 7100097447
1 × $151.95
-
×
Dynabrade 59339 Vacuum Cuff, 1", w/Groove
1 × $13.53 -
×
3M 87179, Scotch-Weld Epoxy Adhesive 2216NS, Tan, Part B, 5 Gallon Drum (Pail), 7010309882
5 × $558.02 -
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $103.88 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $5.03 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.74 -
×
3M 92057, Vinyl Duct Tape 3903, Yellow, 3 in x 50 yd, 6.5 mil, 7010378167
720 × $18.60 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.74 -
×
3M 63738, Contractor Grade Multi-Use Duct Tape 2979, Silver, 1.88 in x 60 yd, 7010335692
24 × $8.83
3M 69011, Trizact Cloth Belt 217EA, A30 JE-weight, 3 in x 132 in, Film-lok, Full-flex, 7010328653, 50 per case
$21.77
Factory Stock, 7-10 Day Leadtime
3M Trizact Cloth Belt 217EA uses proprietary microreplication technology in which micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a JE-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.
Controlled Breakdown for Consistent Finishing
The abrasive and resin structure for the 3M Trizact Cloth Belt 217EA is formulated to break down under medium pressure and keep fresh, sharp mineral cutting to provide consistent finishes on hard metals such as carbon and stainless steel. This belt also features a grinding aid that helps prevent heat buildup, warping and discoloration.
The belt is constructed on a JE-weight, durable cloth backing that helps provide control, conformability, and effective medium-pressure grinding. The resin bonded abrasive provides heat resistance and helps prevent delamination.
Ideal for Robotic Finishing and Polishing
Robotic metal polishing demands the most consistent, refined cut and long abrasive life. 3M Trizact abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt.
Runs Smooth, Finishes Consistently
A film media splice minimizes “chatter marks” and ensures smooth running and consistent results. When compared to conventional abrasive products, proprietary Trizact abrasives produce a finer finish, achieve results faster, and last longer.
