Fast-cutting aluminum oxide abrasive grains are resin-bonded to a durable cotton cloth backing to provide continuous cut and long-life. Our open coat and load-resistant coating make this belt particularly favorable for sanding soft woods. Additionally, the washable backing is suitable for high production environments where the belt may need washing at intervals to remove soft wood resin or pitch buildup.
Aluminum oxide mineral is a popular choice among industrial professionals because of its cut-rate, durability, and long life. It can be used on a wide variety of materials in both woodworking and metalworking, including ferrous alloys, and is the most commonly used industrial abrasive. The abrasive particles are adhered to the cloth backing with resin, creating a strong bond that withstands high heat and pressure.
Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Belts come with various splices that join the belt ends. A film media splice achieves a secure bond with a joining film that minimizes chatter marks, ensures a smooth running belt, and produces consistent finishing results. A sine wave splice is constructed of interlocking fingers that enable the splice to travel smoothly over contact wheels, reduce hinging, and provide added strength to the joint area. Sine wave splices are typically used for coarser grades and wide belts as well as on belts that are going to be washed.

Dynabrade 78305 1-1/2" Dia. x 1" W x 1/4" Shank, 80 Grit, A/O DynaCut Flap Wheel, 10/pack
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
Dynabrade 78007 1/2" W x 12" L Medium Non-Woven DynaBrite Belts, 10/pack
Dynabrade 79149 1/2" W x 24" L 80 Grit Ceramic DynaCut Belts, 50/pack
Dynabrade 78116 3/4" W x 34" L Medium NWN DynaBrite Belt, 10/pack
Dynabrade 96100 Motor Tune-Up Kit
Dynabrade 55043 Trigger Post
Dynabrade 91242 8" Dia. x 220 Grit A/O Non-Vacuum PSA DynaCut Disc, 25/Box
Dynabrade 54262 - 3" Vacuum, Hook Pad, .44" Thickness, 1/4"-20 Thread
Dynabrade 56183 6" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
Dynabrade 94990 1/4" Female Composite-Style Coupler with 1/4" Male Plug Assembly
Dynabrade 57433 Slide Board
Dynabrade 56182 6" Dia. Non-Vacuum Disc Pad, Hook-Face Short Nap
Dynabrade 78571 1-1/2" Dia. x 8-32 Female Center Thread, 60 Grit, A/O, 3-Ply, J-DynaCut Eyelet Star, 50/pack
Dynabrade 13503 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8" (16 mm) Dia. Arbor
Dynabrade 52276 .7 hp Straight-Line Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
Dynabrade 92078 3" Dia. x 180 Grit A/O Non-Vacuum Hook-Face Filmbac DynaCut Disc, 50/Pack
Dynabrade 54705 Rotor/Vane Set
Dynabrade 13516 Dynastraight 6" (152 mm) Extension Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
Dynabrade 93658 3" Dia. x 3/8" CH 40/50 Grit Gulleted/Slotted Diamond Cut-Off Wheel
Dynabrade 91629 1-1/2" W x 24" L 320 Grit A/O DynaCut Belt, 10/pack
Dynabrade 56316 3" x 4-1/4" Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
Dynabrade 11228 Contact Arm Ass'y, 5/8" Dia. x 3/8" W, Rubber Wheel, with H.D. Version of 11218 Arm
Dynabrade 92149 1/2" W x 18" L 60 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
Dynabrade 56234 8" Dia. Non-Vacuum Disc Pad, Vinyl-Face
Dynabrade 11078 Contact Wheel Ass'y, 5/8" Dia. x 3/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
Dynabrade 01185 Vane Set (4pk)
Dynabrade 92100 3" W x 10-11/16" L 40 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 02041 Grease Plate
Dynabrade 57850 3-2/3" W x 7" L Non-Vacuum Dynabug Disc Pad, Vinyl-Face 
