Fast-cutting aluminum oxide abrasive grains are resin-bonded to a durable cotton cloth backing to provide continuous cut and long-life. Our open coat and load-resistant coating make this belt particularly favorable for sanding soft woods. Additionally, the washable backing is suitable for high production environments where the belt may need washing at intervals to remove soft wood resin or pitch buildup.
Aluminum oxide mineral is a popular choice among industrial professionals because of its cut-rate, durability, and long life. It can be used on a wide variety of materials in both woodworking and metalworking, including ferrous alloys, and is the most commonly used industrial abrasive. The abrasive particles are adhered to the cloth backing with resin, creating a strong bond that withstands high heat and pressure.
Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Belts come with various splices that join the belt ends. A film media splice achieves a secure bond with a joining film that minimizes chatter marks, ensures a smooth running belt, and produces consistent finishing results. A sine wave splice is constructed of interlocking fingers that enable the splice to travel smoothly over contact wheels, reduce hinging, and provide added strength to the joint area. Sine wave splices are typically used for coarser grades and wide belts as well as on belts that are going to be washed.

Dynabrade 95560 Bearing
Dynabrade 01468 Spring
Dynabrade 90499 1/2" W x 34" L 120 Grit A/O DynaCut Belt, 50/pack
Dynabrade 79028 1/4" W x 18" L 80 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 07107 Vane Set (5pk)
Dynabrade 95544 Gear Grease, 2.5oz. Tube
Dynabrade 78710 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, 5/pack
Dynabrade 79149 1/2" W x 24" L 80 Grit Ceramic DynaCut Belts, 50/pack
Dynabrade 92102 3" W x 10-11/16" L 80 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 90368 3/4" W x 34" L 80 Grit A/O DynaCut Belt, 50/pack
Dynabrade 92182 1/2" W x 30" L 80 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 01185 Vane Set (4pk)
Dynabrade 92032 3" Dia. x 80 Grit Ceramic Non-Vacuum DynaCut Locking-Type Disc, 25/pack
Dynabrade 95756 Speed Control for Extreme Dynorbital Sanders
Dynabrade 82554 1/4" W x 18" L 60 Grit Ceramic DynaCut Belt, 50/pack
Dynabrade 45202 Sleeve for 48327, 30,000 RPM
Dynabrade 69461 Drop-In Motor
Dynabrade 54705 Rotor/Vane Set
Dynabrade 52474 Vane Set (4pk)
Dynabrade 82495 6" Dia. x 400 Grit A/O Vacuum PSA Filmbac DynaCut Disc, 100/Pack
Dynabrade 93658 3" Dia. x 3/8" CH 40/50 Grit Gulleted/Slotted Diamond Cut-Off Wheel
Dynabrade 94112 7" Dynacut Diamond Segmented Rim Cut-Off Blade
Dynabrade 78709 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
Dynabrade 56106 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
Dynabrade 93609 1" Dia. x 3/8", 3-48 Female Center Thread, 60 Grit A/O, 8 Ply, J-DynaCut Cross Pad, 100/pack
Dynabrade 01024 O-Ring
Dynabrade 78680 4-1/4" Dia. x 4" W x 5/8"-11 Center Thread, 120 Grit, A/O, DynaCut Flap Wheel
Dynabrade 11518 Rubber Drive Wheel
Dynabrade 90412 1/8" W x 24" L 320 Grit A/O DynaCut Belt, 50/pack 
