-
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
Dynabrade 78579 1/4" Dia. x 1" W x 1/8" Center Hole, 60 Grit, 100/pack
100 × $0.45 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
Dynabrade 92151 1/2" W x 18" L 120 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
50 × $4.35 -
×
Air Turbine Tools 310RDM - 1/4" Router Hand Tool Series, 30,000RPM, 33432
1 × $950.00 -
×
Insize 4120-10N, METRIC THREAD RING GAGE, NO GO, M10x1.5, 6928640341762
1 × $53.29 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
600 × $1.50 -
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
1 × $746.76 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
Dynabrade 51810 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/8" Collet
1 × $715.47 -
×
3M 64926, Scotch-Brite Hand Pad 7447 PRO, PO-HP, A/O Very Fine, 6 in x 9 in, 7100023339, 20/Carton
3 × $28.53 -
×
Dynabrade 51624 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
1 × $573.77 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60
3M 52755, Cool Flow Exhalation Valve 7583, System Component, 7000002159, 10 ea/Bag
$45.71
Factory Stock, 7-10 Day Leadtime
This exhalation valve is used with 3M Half Facepiece Respirators 7500 Series and Full Facepiece Respirators 6000 and FF-400 Series.
The 3M Exhalation Valve 7583, Respiratory Protection Replacement Part, works with the 3M Half Facepieces 7500 Series, and the 3M Full Facepiece Respirators 6000 and FF 400 Series (all sold separately). This valve is used with the 3M Center Adapter 6864 (sold separately) on the Full Facepiece 6000 Series. This replacement part can extend the service life of respiratory protection equipment and potentially result in cost savings.
