-
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
Dynabrade 94467 DynaJet In-Line Blow Gun
1 × $35.86 -
×
Dynabrade 91429 1/2" W x 12" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
Dynabrade 91315 11-1/4" Dia. x 36 Grit A/O Non-Vacuum Hook-Face DynaCut Disc, 10/Box
30 × $10.04 -
×
3M Cubitron 3 Cut and Grind Wheel, 88992, 36+, T27, 7 in x 1/8 in x 5/8 in-11 (180 x 3.2 mm x 5/8-11 in), ANSI, 10 ea/Case, 7100313195
10 × $18.25 -
×
Dynabrade 90370 3/4" W x 34" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $2.55 -
×
Dynabrade 90924 3" Dia. x 40 Grit A/Z DynaCut Locking-Type (TR), Flap Disc, 10/pack
20 × $4.61 -
×
Dynabrade 78020 1/2" W x 18" L Medium NWN DynaBrite Belt, 10/pack
10 × $6.03 -
×
Dynabrade 59339 Vacuum Cuff, 1", w/Groove
1 × $13.53 -
×
Dynabrade 90411 1/8" W x 24" L 220 Grit A/O DynaCut Belt, 50/pack
50 × $0.85 -
×
Dynabrade 79808 DynaBolt AO 4" x .035" x 3/8" T1 Cut-off Wheel, Box of 10 Discs
10 × $2.14 -
×
Dynabrade 56180 5" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
1 × $25.46 -
×
Dynabrade 98580 Motor Tune-Up Kit for National Detroit Sander Models
1 × $130.00 -
×
Dynabrade 91316 11-1/4" Dia. x 60 Grit A/O Non-Vacuum Hook-Face DynaCut Disc, 10/Box
10 × $8.19
-
×
Dynabrade 90367 3/4" W x 34" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $2.55
-
×
Dynabrade 18570 Vane Set (4pk)
1 × $29.34 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38
3M 52755, Cool Flow Exhalation Valve 7583, System Component, 7000002159, 10 ea/Bag
$45.71
Factory Stock, 7-10 Day Leadtime
This exhalation valve is used with 3M Half Facepiece Respirators 7500 Series and Full Facepiece Respirators 6000 and FF-400 Series.
The 3M Exhalation Valve 7583, Respiratory Protection Replacement Part, works with the 3M Half Facepieces 7500 Series, and the 3M Full Facepiece Respirators 6000 and FF 400 Series (all sold separately). This valve is used with the 3M Center Adapter 6864 (sold separately) on the Full Facepiece 6000 Series. This replacement part can extend the service life of respiratory protection equipment and potentially result in cost savings.
