-
×
Dynabrade 82495 6" Dia. x 400 Grit A/O Vacuum PSA Filmbac DynaCut Disc, 100/Pack
300 × $1.47 -
×
Dynabrade 90614 3" W x 10-11/16" L 80 Grit A/O DynaCut Belt, 10/pack
50 × $3.71 -
×
3M 65875, Scotch Storage Packaging Tape 3650-2, 1.88 in x 54.6 yd (48 mm x 50 m),
2 pack - 6 packs/case, 7100115795
6 × $9.64 -
×
Dynabrade 79004 1/8" W x 12" L 80 Grit A/Z DynaCut Belt, 50/pack
200 × $1.24 -
×
Dynabrade 95216 Pin
2 × $2.07 -
×
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
2 × $83.35 -
×
Dynabrade 01794 Rubber Drive Wheel
3 × $299.83 -
×
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
1 × $9.90 -
×
Dynabrade 90368 3/4" W x 34" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $2.55 -
×
Dynabrade 96425 Screws For Vacuum Shroud (57737)
3 × $2.07 -
×
Dynabrade 39200 2" Type C, Roto Peen Flaps
2 × $70.53 -
×
Dynabrade 78049 1/2" W x 24" L Coarse NWN DynaBrite Belt, 10/pack
10 × $6.40 -
×
Dynabrade 82489 6" Dia. x 100 Grit A/O Vacuum PSA Filmbac DynaCut Disc, 100/Pack
100 × $1.47
-
×
Dynabrade 78724 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.57 -
×
Dynabrade 59380 Rotor/Vane Set
2 × $71.27 -
×
Dynabrade 90211 1/8" W x 18" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.10
3M 50257, Roloc Disc 777F, TSM, 3 in x NH, 36 YF-weight, 7000118303
$1.61
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
