-
×
Dynabrade 79079 1/2" W x 13" L 120 Grit A/Z DynaCut Belt, 50/pack
50 × $2.42 -
×
Dynabrade 79119 1/4" W x 18" L 40 Grit Dynafire Premium Ceramic Belt, 50/pack
50 × $3.36 -
×
Dynabrade 96644 Motor Tune-Up Kit for 2.8hp Rebel Series
1 × $633.37 -
×
3M 60332, Scotch Fire-Retardant Electric Arc Proofing Tape 77, 1-1/2 in x 20 ft, Black, 7100004537
10 × $13.36 -
×
Dynabrade X3161H - 3" Mini Extreme & 6" Extreme Random Orbital Sander, with Hook Pad, Non Vac, Combo Kit 12,000 RPM, 3/16" Dia., Rear Exhaust
1 × $401.00 -
×
Dynabrade 64000 SuperFinisher, 115 Volts (AC), 1 Phase, 60 Hz
1 × $19,371.00 -
×
Dynabrade 95162 Screw
1 × $2.07 -
×
Dynabrade 91563 6" Dynacut Extreme Orange Premium Film Disc, 80 Grit, Hook & Loop, Vacuum Holes, 50/Box
1 × $49.50 -
×
3M 53535, Scotch Box Sealing Tape 315, Clear, 72 mm x 914 m, 4 Rolls/Case, 7100240726
4 × $145.52 -
×
Dynabrade 96024 Tune-Up Kit for Orbital Sanders
1 × $168.41 -
×
Standard Abrasives 707034, A/O Straight Cartridge Roll, 3/8 in x 1 in x 1/8 in 180, 7100103130
101 × $0.38 -
×
Dynabrade 64674 Filter Cartridge
1 × $75.74 -
×
Dynabrade 11337 Contact Arm Ass'y, 5/16" Dia. x 5/8" W, Steel Wheel, with 1/2" W Platen
1 × $105.09 -
×
Dynabrade 79013 1/2" W x 12" L 120 Grit A/Z DynaCut Belt, 50/pack
50 × $1.85
-
×
3M 53530, Scotch Box Sealing Tape 313, Clear, 48 mm x 100 m, 36 Rolls/Case, 7100240701
36 × $7.08
-
×
Dynabrade 50014 3/8" (.375) Capacity Collet Sleeve
1 × $35.13 -
×
Dynabrade 80058 Motor Brush Set, 230V-50 Hz
1 × $51.66
-
×
Dynabrade 90040 5" Dia. Foam, Flat Face Polishing Pad
1 × $17.33 -
×
![Dynabrade 95800 [1-1/4" Thread - 1-1/4" Non-Thread], Non-Conductive Vacuum Hose Cuff (Includes 95895 Insert)](https://store.alloycoatingsupply.com/wp-content/uploads/2018/08/95800-300x300.jpg)
Dynabrade 95800 [1-1/4" Thread - 1-1/4" Non-Thread], Non-Conductive Vacuum Hose Cuff (Includes 95895 Insert)
1 × $10.80
3M 28476, Disc pad Hub, 2-1/2 in 5/8-11 Internal Low Profile, 7000045288
$19.72
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub has an internal threaded metal insert that threads onto the shaft of a sander and grinder to hold a disc pad face plate and fiber disc in place.
Our 3M Disc Pad Hub holds the face plate firmly in position to support a fiber disc with a 7/8 inch center hole, which is secured to the hub with a compatible retainer nut. The disc pad hub enables operators to select face plates with four different densities?Soft, Medium, Hard and Extra-Hard?offering the convenience of using a single power tool for multiple grinding applications. Face plates are sold separately.
