-
×
Dynabrade 48371 .4 hp Straight-Line Die Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet
1 × $437.00 -
×
Dynabrade 52717 Cone or Plug Wheel Grinder, 18,000 RPM, 3/8"-24 Male Thread Spindle
1 × $607.00 -
×
Dynabrade 97060 Lever Pivot Pin, M2.5 x 24
1 × $2.07 -
×
Dynabrade 01185 Vane Set (4pk)
1 × $26.54 -
×
3M 53535, Scotch Box Sealing Tape 315, Clear, 72 mm x 914 m, 4 Rolls/Case, 7100240726
4 × $145.52
-
×
Dynabrade 79901 3-1/2" Dia. x 120 Grit A/O Non-Vacuum PSA DynaCut Disc, 100/box
1 × $42.65 -
×
Dynabrade 50679 Open-End Wrench, 26 mm
1 × $8.33 -
×
Dynabrade 92245 - 4" (102 mm) Dia. x 3/4" (19 mm) W Bent Coarse Wire Wheel
2 × $47.09 -
×
Dynabrade 78008 1/2" W x 12" L Very Fine Non-Woven DynaBrite Belts, 10/pack
10 × $5.03 -
×
Dynabrade 96044 Motor Tune-Up Kit
1 × $160.05 -
×
3M 79553, Scotch Heavy Duty Shipping Packaging Tape, 3850-60, 1.88 in x 65.6 yd
(48 mm x 60 m), 7100158252
8 × $6.44
-
×
3M 92210, Scotch Shipping Packaging Tape 3950S-6, 1.88 in x 38.2 yd (48 mm x 35 m), 7100242420
6 × $26.35
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
