-
×
Dynabrade 78710 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, 5/pack
5 × $1.57 -
×
3M 85640, Scotch Shipping Packaging Tape 195, 1.88 in x 22.2 yd (48 mm x 20.3 m), 7100233595
36 × $2.96 -
×
3M 92568, Temflex, Black - AM, 19mm x 18m (3/4in x 60ft), 7100169254
100 × $1.52 -
×
Standard Abrasives 714696, Aluminum Oxide Handy Roll, P400 J-weight, 1 in x 50 yd, 7010369523
1 × $26.59 -
×
Dynabrade 50014 3/8" (.375) Capacity Collet Sleeve
1 × $35.13 -
×
Dynabrade 52861 .4 hp Straight-Line Pencil Grinder, Rear Exhaust, 25,000 RPM, 1/8" Collet
1 × $582.00 -
×
Dynabrade 92100 3" W x 10-11/16" L 40 Grit A/Z DynaCut Belt, 10/pack
10 × $4.56 -
×
Dynabrade 90437 1" W x 30" L Medium NWN DynaBrite Premium Belt, 10/pack
10 × $18.45 -
×
Dynabrade 96005 - 1/4" Male Plug with 3/8" NPT Male Thread
1 × $10.83 -
×
3M 92618, Temflex Vinyl Electrical Tape 175, Black, 3/4 in x 60 ft (19 mm x 18 m), 7 mil, 7100188506
100 × $1.97 -
×
Dynabrade 52720 Cone or Plug 6" (152 mm) Extension Wheel Grinder, 15,000 RPM, 3/8"-24 Male Thread Spindle
1 × $755.00 -
×
Dynabrade 80053 Vacuum Speed Control Ass'y, 110V
1 × $67.45
-
×
Dynabrade 11682 Dynabelter Contact Arm Assembly, 4 Inch Dia x 1/2 Inch, 70 Durometer, Wheel Radiused
1 × $402.12 -
×
Dynabrade 50771 Shroud-3"
1 × $54.71 -
×
Dynabrade 78860 Crimped Wire Radial Wheel Brush 2" Dia. x .006 x 7/16" Steel
1 × $18.17 -
×
Dynabrade 64000 SuperFinisher, 115 Volts (AC), 1 Phase, 60 Hz
1 × $19,371.00 -
×
Dynabrade 69481 5" Extreme Drop-in Motor, 3/32" Orbit
1 × $164.91 -
×
Dynabrade 92245 - 4" (102 mm) Dia. x 3/4" (19 mm) W Bent Coarse Wire Wheel
1 × $47.09 -
×
Dynabrade 59182 6" Dia. Dynorbital-Spirit Random Orbital Sander, Central Vacuum, 3/16" Orbit
1 × $240.00 -
×
Dynabrade 67501 Adjustable Machine Pedestal for Versatility Grinder
1 × $1,301.17
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
