-
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
Insize 7230, SCRIBER, 6928640320064
1 × $6.77 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
Dynabrade 32013 Dry Hat Filter (for model 61204)
1 × $156.17 -
×
Dynabrade 15006 Mini-Dynafile II Abrasive Belt Tool Versatility Kit
1 × $789.82 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M 28849, Unitized Wheel Mandrel 28849, 1-7/8 in x 1/4 in x 3/4 in x 1/2 in, 7100082548
5 × $19.09 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
Dynabrade 78174 2" Dia., Extra Coarse, NWN DynaBrite, TR Locking-Type Disc, 25/pack
25 × $2.14 -
×
Dynabrade 51753 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
1 × $573.77 -
×
Dynabrade 93696 3/8"-24 Female 3/8"-24 Male, 1-1/16" Length
1 × $66.45 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M 26016, PPS Series 2.0 Adapter, Type S9, 16 mm Male, 1.5 mm Thread, 7100135330
4 × $25.96 -
×
Insize 1179-1000, DIGITAL RTJ RING GROOVE CALIPER, inside diameter of RTJ ring groove .6-40"/15-1000mm, outside diameter of RTJ ring groove 1.2-40"/30-1000mm, 6928640394409
1 × $2,201.72
-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
1 × $25.96 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
