-
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,583.72 -
×
3M 48567, Flatback Tape 2517, Medium Brown, 48 mm x 55 m, 6.5 mil, 24Rolls/Case, 7000088502
24 × $21.32 -
×
3M 16583, Accuspray Atomizing Head, Green, 1.3 mm, 7010309279
10 × $10.67 -
×
Dynabrade 94991 1/4" Female Composite-Style Coupler with 1/4" Female Plug Assembly
1 × $44.05 -
×
Insize 1121-150A, DIGITAL INSIDE POINT CALIPER, .9-6"/24-150mm, 6928640302251
1 × $252.14
-
×
3M 26000, PPS Series 2.0 Spray Cup System Kit, Standard (22 fl oz, 650
mL), 200 Micron Filter, 7100134641
1 × $132.50 -
×
Insize 3101-25A, ELECTRONIC OUTSIDE MICROMETER (IP65), 0-25mm/0-1", resolution 0.001mm/.00005", 6928640303760
1 × $271.21
-
×
Air Turbine Tools 310RSV - 6mm Router Hand Tool Series, 40,000RPM, 33441
1 × $950.00 -
×
3M 06536, Scotch Steel Gray Masking Paper, 06536, 36 in x 1000 ft, 1 per case, 7000045443
1 × $264.36 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 75U
2 × $171.30 -
×
3M 05009, Utility Cloth Roll 211K, 100 J-weight, 1 in x 50 yd, Full-flex, 7100016843
5 × $58.76 -
×
Insize 4809, U.S. STAND SHEET METAL GAGE, 0-36(.3125~.0070"), 6928640330162
1 × $35.18
-
×
Insize 3101-150E, DIGITAL OUTSIDE MICROMETER, IP65, 5-6"/125-150mm, 6928640326837
1 × $385.58
-
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
