-
×
3M 45029, Diamond Grade Digital Reflective Sheeting 3924SUDS, Fluorescent Orange, 30 in x 50 yd, 1 Roll/Case, 7100282407
1 × $1,499.44 -
×
Insize 4706-1150, 120? SQUARE, 5.9x5.9", 6928640318276
1 × $51.21
-
×
Dynabrade 77794 4-1/2" Dia. x 7/8" Center Hole, 80 Grit, Type 29, Ceramic DynaCut Flap Disc, 10/pack
10 × $5.92 -
×
3M 16573, Accuspray Air Flow Control Valve, 7000042715
1 × $41.05 -
×
3M 26018, PPS Series 2.0 Adapter, Type S11, 3/8 Male, 18 Thread NPS, 7100135942
1 × $25.96 -
×
Insize 0210-G260, INFRARED THERMOMETER (BASIC TYPE), -22 ?F~500?F/-30?C~260?C, 6974029773310
1 × $66.86
-
×
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
24 × $3.79 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $400.59 -
×
3M 06147, Scotch Electrical Moisture Sealant Roll 06147, 2-1/2 in x 10 ft, Black,1 roll/carton, 10 rolls/Case, 7000005872
10 × $28.92 -
×
Insize 0131-A120, LIGHT METER, 0.01~19.99FC, 0.1~199.9FC, 1~1999FC, 10~19990FC, 0.1~199.9Lux, 1~1999Lux, 10~19990Lux, 100~199900Lux, 6974029776557
1 × $110.63
-
×
3M 26135, PPS Series 2.0 Adapter, Type S40, Trapezoidal Thread, 7100135335
4 × $25.96 -
×
3M 35124, Grippy Sanding Cloth Trial Kit, 7100230957
10 × $6.84 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
