-
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
Insize 3101-100E, DIGITAL OUTSIDE MICROMETER, IP65, 3-4"/75-100mm, 6928640326813
1 × $311.93 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $871.15 -
×
3M 86992, Diamond Disc, 3" Roloc, 674W, 120 Mesh, TR, 7100143477, Box of 5
1 × $54.54 -
×
Insize 4120-11N, METRIC THREAD RING GAGE, NO GO, M11x1.5, 6928640341779
1 × $53.81
-
×
3M 62715, Scotch-Weld Stainless Steel High Temperature Pipe Sealant PS67, White, 250 mL Tube, 7100039215, 2/case
2 × $75.72 -
×
Dynabrade 77760 4-1/2" Dia. x 7/8" Center Hole, 120 Grit, Z/A, Type 27, DynaCut Flap Disc W/Fiberglass, 10/pack
10 × $4.19 -
×
3M 02405, Utility Cloth Sheet 211K, 9 in x 11 in 220 J-weight, 7010299775
250 × $2.41 -
×
Dynabrade 78726 3/8" x 3/8"-B122 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.38 -
×
3M 53034, 663FC, 3/4" X 90", 20u, Diamond Trizact Belt 7100205969
1 × $359.45 -
×
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
36 × $18.24 -
×
3M 06536, Scotch Steel Gray Masking Paper, 06536, 36 in x 1000 ft, 1 per case, 7000045443
1 × $264.36 -
×
Insize 4809, U.S. STAND SHEET METAL GAGE, 0-36(.3125~.0070"), 6928640330162
1 × $35.18
-
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
