-
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $24.56 -
×
Insize 1188-300AWL, DIGITAL BLADE CALIPER, 0-12"/0-300mm, built-in wireless, 6940561942620
1 × $384.72 -
×
3M 94383, Adflo Powered Air Purifying Respirator HE System w 3M Speedglas Welding Helmet 9100 MP, 37-1101-30iSW, 1 EA/CASE, 7100200573
1 × $2,710.64
-
×
Standard Abrasives 714179, Aluminum Oxide Handy Roll, P240 J-weight, 1-1/2 in x 50 yd, 7100050575
1 × $37.54 -
×
3M 26105, PPS Series 2.0 Adapter, Type S21, 14 mm Female, 1.0 mm
Thread, 7100135829
1 × $25.96 -
×
Air Turbine Tools 310RSV - 6mm Router Hand Tool Series, 40,000RPM, 33441
1 × $950.00 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $688.35 -
×
Insize 0210-G260, INFRARED THERMOMETER (BASIC TYPE), -22 ?F~500?F/-30?C~260?C, 6974029773310
1 × $66.86
-
×
3M 27607, Speedglas Welding Helmet 9002NC 04-0100-20NC, 7010341356
1 × $331.17
-
×
3M 15041, Scotch Electrical Shielding Tape 24, 1 in x 15 ft (25 mm x 4,6 m), 7000031348
10 × $38.32 -
×
Dynabrade 78603 1/2" Dia. x 1" W x 1/8" Center Hole, 80 Grit, 100/pack
100 × $0.58 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
