-
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
Dynabrade 93351 Carbide Burr 12-Piece Burr Kit, 1/8" Shank
1 × $216.84 -
×
Insize 1120-150P, DIGITAL INSIDE GROOVE CALIPER, .87-6"/22-150mm, IP67 dust/waterproof, 6928640387401
1 × $580.54 -
×
3M 26172, PPS Series 2.0 6-Pack Starter Kit, Standard (22 fl oz, 650mL), 200 Micron Filter, 7100166584
2 × $32.44 -
×
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
5 × $10.20 -
×
3M 05027, Utility Cloth Roll 211K, 150 J-weight, 1-1/2 in x 50 yd, Full-flex, 7100031693
5 × $82.04 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 45U
2 × $171.30 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 125U
12 × $5.70
-
×
Insize 0020-A199, VIBRATION PEN (THREE PARAMETERS), 6974029777059
1 × $1,044.21
-
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 64799, Scotch-Brite EXL Unitized Mounted Point, B121 x 1/8 in 8A CRS, 3M 7010329841
50 × $6.62 -
×
3M 11000, Roloc Disc 361F, 24 YF-weight, TR, 2 in, Die R200P, 7000028183
200 × $1.25 -
×
Insize 6140, DEPTH BASE ATTACHMENT, suitable for calipers with beam width (w) .630", 6928640303579
1 × $24.78
-
×
3M 01253, Red Abrasive Stikit Disc Value Pack, 6 in, P220 grade, 7010308767, 25 discs per carton
4 × $11.75 -
×
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
9 × $79.81 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
Dynabrade 91430 1/2" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.20 -
×
3M 26054, PPS Series 2.0 Adapter, Type S18, 3/8 Female, 18 Thread NPS,
4 per case
1 × $25.96 -
×
3M 20967, Portable Utility Cloth Roll 314D, P240 J-weight, 1 in x 20 yd, 7010290604
5 × $16.22 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
