-
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 93623, Steel Mesh Viso V4G-10P 10 ea/Case, 7000103815
1 × $159.55 -
×
3M 05027, Utility Cloth Roll 211K, 150 J-weight, 1-1/2 in x 50 yd, Full-flex, 7100031693
5 × $82.04 -
×
Standard Abrasives 703989, A/O Full Taper Cartridge Roll, 3/4 in x 1-1/2 in x 3/16 in 80, 7100093005
50 × $1.08 -
×
3M 19768, Utility Cloth Sheet 314D, 9 in x 11 in P180 J-weight, 7000000356
500 × $1.37 -
×
3M 10455, Cloth Sheet 481W, 220, 9 in x 11 in, 7010294811
25 × $4.01 -
×
Dynabrade 98272 1/2" NPT Female Plug
1 × $21.29 -
×
Standard Abrasives 707195, Aluminum Oxide Handy Roll, P80 J-weight, 2 in x 50 yd, 7100031626
1 × $50.10 -
×
Standard Abrasives 840239, Quick Change Surface Conditioning GP Disc, 2560579, Very Fine, TSM, 1-1/2 in, 7010367172, 50 per case
50 × $0.90 -
×
Insize 6144, ACCESSORY SET FOR DIGITAL CALIPERS, 6928640380839
1 × $83.88
-
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 82454, Hot Melt Adhesive 3792 LM Q, Clear, 5/8 in x 8 in, 7000000880, 11 LBS/Case
11 × $26.07 -
×
Insize 6301, MICROMETER STAND, 6928640307300
1 × $38.90
-
×
3M 19765, Utility Cloth Sheet 314D, 9 in x 11 in P280 J-weight, 7000000353
250 × $1.37 -
×
Standard Abrasives 714179, Aluminum Oxide Handy Roll, P240 J-weight, 1-1/2 in x 50 yd, 7100050575
1 × $37.54 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
