-
×
Air Turbine Tools 310RDM - 1/4" Router Hand Tool Series, 40,000RPM, 33442
1 × $950.00 -
×
3M 26119, PPS Series 2.0 Adapter, Type S27, 16 mm Male, 1.5 mm Thread, 7100135925
4 × $25.96 -
×
3M 26140, PPS Series 2.0 Adapter, Type S45, 1/4 Female, 19 Thread BSP, 7100135336
4 × $25.96 -
×
Insize 0110-1125, ANEMOMETER, 6974029776595
1 × $178.56 -
×
3M Super Abrasives Roloc Disc, 2" Type-R, Medium AO High Strength, Box of 50
1 × $77.50 -
×
Standard Abrasives 713159, Aluminum Oxide Handy Roll, P120 J-weight, 1-1/2 in x 50 yd, 7010290409
1 × $37.54 -
×
3M 62610, Scotch-Weld Threadlocker TL62, Red, 50 mL Bottle, 7100039196, 10/case
10 × $36.70 -
×
3M 82506, Steel Mesh Faceshield Screen W96M 82506-00000, Molded 10 EA/Case, 7000127168
1 × $376.36
-
×
3M 01875, Charge-Collection Solar Tape 3011, 2 mm x 1200 m, 7010312686
9 × $602.05 -
×
Standard Abrasives 708751, PSA A/O Disc, 12 in x NH, 60, 7010370081
10 × $5.83 -
×
Insize 0131-A120, LIGHT METER, 0.01~19.99FC, 0.1~199.9FC, 1~1999FC, 10~19990FC, 0.1~199.9Lux, 1~1999Lux, 10~19990Lux, 100~199900Lux, 6974029776557
1 × $110.63
-
×
3M 19772, Utility Cloth Sheet 314D, 9 in x 11 in P80 J-weight, 7000000359
250 × $1.45 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
