-
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
Standard Abrasives 78525, Ceramic Pro Type 29 Flap Disc, 645134, 4-1/2 in x 7/8 60 Y-weight, 7010331465
10 × $7.50 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
3M 31381, Cubitron II Hookit Marine Sanding Abrasive Disc 737U, 31381, 6 in, 120+, 7100062433
80 × $19.02 -
×
3M 17228, Heavy Duty Duct Tape DT11, Black, 48 mm x 54.8 m, 11 mil, 7100158377
24 × $12.90 -
×
Standard Abrasives 32985, Aluminum Oxide Overlap Disc, 714721, 60 Grit, 2 in x 8-32 x 2 Ply, 7100116380
100 × $1.67 -
×
3M 26132, PPS Series 2.0 Adapter, Type S37, 5/8 Male, 11 UNC Modified, 7100135949
1 × $25.96 -
×
3M 65055, Scotch-Brite Heavy Duty Hand Pad 7440, HP-HP, A/O Medium, 6 in x 9 in, 7100080459, 40/Case
1 × $153.38 -
×
3M 43060, Aura Particulate Respirator 9205+, N95, 7100232219, 240 ea/Case
1 × $283.11 -
×
3M 19771, Utility Cloth Sheet 314D, 9 in x 11 in P100 J-weight, 7000021272
250 × $1.43 -
×
3M 20922, PSA Cloth Disc 348D, 60 X-weight, 1-1/2 in x NH, Die 150S, 7010326528.
500 × $0.48 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67
3M 28322, Clean Sanding Soft Interface Disc Pad, 6 in x 1/2 in 52 Holes, 7100005497
$17.66
Factory Stock, 7-10 Day Leadtime
3M Soft Interface Disc Pad is constructed of _ inch soft density foam with a 3M Clean Sanding hole pattern to allow dust extraction and minimize loading during sanding. The soft foam construction enables the pad to conform to edges and contours, making it a good match for sensitive workpieces where gouging and marring is a top concern.
Providing Cushion and Conformability
3M Soft Interface Disc Pad provides a greater cushion and more conformability than a pad with medium density foam. Use this pad to reduce edge cutting when the pad is tipped on edge and maintain closer contact with the edge while maximizing dust extraction. The pad contains a series of uniquely designed holes which match those in 3M Clean Sand Back Up Pads, allowing sanding dust to be pulled through the holes and away from the sanding surface. This improves the work environment and prolongs disc life.
Easy Attachment
The Soft Interface Disc Pad has two sides. One side features loop material, which attaches to the back up pad used on the sanding tool. The opposite side contains hook material, which attaches to the Hookit sanding disc of choice.
Altogether, our 3M Soft Interface Disc Pad is ideal for operators who seek an added level of conformability for their sanding projects. The responsive foam design, attachment system and Clean Sanding hole pattern combine to cushion the workpiece, minimize dust and ? ultimately ? get the job done.
