-
×
Standard Abrasives 707195, Aluminum Oxide Handy Roll, P80 J-weight, 2 in x 50 yd, 7100031626
1 × $50.10 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 05744, Hookit Hand File Board, 2-3/4 in x 16 in, 7000045717
1 × $73.94 -
×
Dynabrade 91165 1/2" W x 13" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.95 -
×
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
4 × $84.19 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $94.50 -
×
3M 76625, Roloc Disc 777F, 80 YF-weight, TR, 1 in, Die R100N, 7000045621
500 × $0.62 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
Standard Abrasives 843932, Quick Change Surface Conditioning FE Disc, A/O Medium, TSM, Maroon, 7 in x 5/8"-11, 7010330326, 10/case
10 × $11.08 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
Norton 66254432925 Wheel, 3" X 1/2" X 1/4" Bear-Tex, Rapid Blend, Non-Woven 5 Density, A/O, M Grit, 20 Each
20 × $17.78 -
×
3M 26129, PPS Series 2.0 Adapter, Type S34, 3/8 Female, 18 Thread NPS, 7100135938
4 × $38.43 -
×
3M 56038, Hookit Microfinishing Film Disc 268L, 30 Mic, Type D, 3 in x 7/8 in, Die 300M, 7000000297, 100/Case
100 × $0.51 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
2 × $915.00 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67
3M 27628, Flange Adapter 6 in Radial Bristle Brush Set, 2 in x 1 in, 7000028515
$6.57
Factory Stock, 7-10 Day Leadtime
3M Flange Adapter holds together a minimum of seven 6 inch radial bristle discs for use on bench motors with a shaft size of 1 inch diameter.
For bench motors with shafts smaller than 1 inch, a 3M™ Telescoping Wheel Flange Adapter (Part No. 5) can be inserted into the center hole to fit 1/2 inch, 5/8 inch, 3/4 inch or 7/8 inch shafts. When a greater thickness of bristle discs is needed, 3M™ Spindle Extender Adapters (Part No. 30134) can be added to increase the disc capacity of the flange adapter. These additional adapters are sold separately.
