-
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
600 × $6.03 -
×
Standard Abrasives 32953, PSA A/O Disc, 711880, 2 in x NH, 60, 7010310798
100 × $0.00 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 03601, Plastic Emblem and Trim Adhesive, 1 fl oz, 7010294867, 12 per case
12 × $3.65 -
×
3M 87140, Hookit Wetordry Paper Disc 401Q, 2000 A-weight, 5 in x NH, Die 500X, 7010363499
250 × $1.40 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $438.51 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
Standard Abrasives 547003, Adapter, 5/8"-11 Male x 3/8"-24 Female, 7010368726
1 × $10.22 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
3M 20230, Scotch-Seal Metal Sealant 2084, Silver, 5 Gallon Drum (Pail), 7000046344
5 × $198.10 -
×
3M 06840, Booth Coating, 5 gal, 7000120531
1 × $467.27 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 71346, 675L, 1" X 120", 125u, Diamond Microfinishing Film Belts, 7010534823
1 × $97.89 -
×
3M 41531, Scotch-Weld Epoxy Adhesive 420, Black, Part B, 5 Gallon Drum (Pail), 7000000827
5 × $583.75 -
×
ACS Diamond Cloth Belt, CX1250 5/8" X 120" 125U
9 × $47.60 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38
3M 27628, Flange Adapter 6 in Radial Bristle Brush Set, 2 in x 1 in, 7000028515
$6.57
Factory Stock, 7-10 Day Leadtime
3M Flange Adapter holds together a minimum of seven 6 inch radial bristle discs for use on bench motors with a shaft size of 1 inch diameter.
For bench motors with shafts smaller than 1 inch, a 3M™ Telescoping Wheel Flange Adapter (Part No. 5) can be inserted into the center hole to fit 1/2 inch, 5/8 inch, 3/4 inch or 7/8 inch shafts. When a greater thickness of bristle discs is needed, 3M™ Spindle Extender Adapters (Part No. 30134) can be added to increase the disc capacity of the flange adapter. These additional adapters are sold separately.
